Briggs & Stratton 13D1-19, 13D1-(19) PPO manual Safety − Section a

Page 6

10 SERIES

OM−05463

 

 

SAFETY − SECTION A

This information applies to 10 Series en- gine driven pumps. Refer to the manual accompanying the engine before at- tempting to begin operation.

Because pump installations are seldom identical, this manual cannot possibly provide detailed instructions and pre- cautions for each specific application. Therefore, it is the owner/installer’s re- sponsibility to ensure that applications not addressed in this manual are per- formed only after establishing that nei- ther operator safety nor pump integrity are compromised by the installation.

Before attempting to open or service the pump:

1.Familiarize yourself with this man- ual.

2.Shut down the engine and take precautions to ensure that the pump will remain inoperative.

3.Allow the pump to completely cool if overheated.

4.Check the temperature before opening any covers, plates, or plugs.

5.Close the suction and discharge valves.

6.Vent the pump slowly and cau- tiously.

7.Drain the pump.

This pump is designed to handle dirty water containing specified entrained

solids. Do not attempt to pump volatile, corrosive, or flammable liquids which may damage the pump or endanger per- sonnel as a result of pump failure.

Use lifting and moving equipment in good repair and with adequate capacity to prevent injuries to personnel or dam- age to equipment. Suction and dis- charge hoses and piping must be re- moved from the pump before lifting.

After the pump has been positioned, make certain that the pump and all pip- ing connections are tight, properly sup- ported and secure before operation.

Do not operate the pump against a closed discharge valve for long periods of time. If operated against a closed dis- charge valve, pump components will deteriorate, and the liquid could come to a boil, build pressure, and cause the pump casing to rupture or explode.

Do not remove plates, covers, gauges, pipe plugs, or fittings from an over- heated pump. Vapor pressure within the pump can cause parts being disen- gaged to be ejected with great force. Al- low the pump to cool before servicing.

SAFETY

PAGE A − 1

Page 5 Page 7
Image 6
Page 5 Page 7
Contents With Parts List ModelsGORMAN-RUPP Company D MANSFIELD, Ohio Page Installation − Section B Table of Contents IntroductionSafety Section a Troubleshooting − Section DTable of Contents Introduction Safety − Section a Series Installation − Section B Preinstallation InspectionPositioning Pump Suction and Discharge PipingSuction Lines Discharge Lines Recommended Minimum Suction Line Submergence vs. VelocitySeries Starting Operation − Section CPriming OperationStopping Series Troubleshooting − Section D Priming PrimeTrouble Possible Cause Probable Remedy Pump Stops or Preventive Maintenance Schedule Preventive MaintenancePump Maintenance and Repair Section E Section Drawing Pump Model 13D1−19Parts List Pump Models 13D1−19 From S/N 1259620 upD1−19 Pump Parts Only 13D1−19 Pump Parts Only Pump and Seal Disassembly and Reassembly Series −855 Seal Assembly Lubrication Extent and Duration of Warranty GORMAN-RUPP Company GORMAN-RUPP of Canada Limited

13D1-(19) PPO, 13D1-19 specifications

The Briggs & Stratton 13D1-19,13D1-(19) PPO engine is a versatile power source known for its reliability and performance in various outdoor equipment applications. Designed primarily for use in lawnmowers, pressure washers, and other gardening machinery, the 13D1 series boasts features that cater to both consumer and commercial needs.

One of the standout features of the 13D1-19 engine is its compact design, which allows for easy installation in a variety of equipment types. This space-efficient construction is especially beneficial for manufacturers looking to create lightweight and maneuverable machines. The air-cooled, four-stroke engine configuration provides a balance between power output and fuel efficiency, making it an ideal choice for extended usage without the worry of overheating.

The 13D1-19,13D1-(19) PPO is equipped with a reliable carburetor system that ensures optimal fuel delivery and improved combustion efficiency. This contributes not only to better engine performance but also to reduced emissions, aligning with modern environmental standards. Furthermore, the engine features an efficient ignition system that offers quick starts, even in challenging weather conditions, ensuring that users can rely on it when needed.

Another notable characteristic is the engine's solid construction, featuring durable components designed to withstand the rigors of outdoor work. The low vibration design enhances user comfort during operation, reducing fatigue and allowing for longer working hours without discomfort. Additionally, the engine is designed for easy maintenance, featuring accessible parts for routine checks and repairs, which helps extend its lifespan.

The 13D1-19,13D1-(19) PPO also incorporates advanced technologies such as improved air filtration systems, which enhance performance by ensuring the engine operates with clean air. This reduces wear and tear on internal components, promoting a longer service life.

Overall, the Briggs & Stratton 13D1-19,13D1-(19) PPO engine is an excellent choice for those seeking a powerful, efficient, and reliable engine solution for a wide range of gardening and outdoor equipment. Its combination of durability, user-friendly features, and modern technology makes it a preferred option for both casual users and professionals in the landscaping industry.
Top Page Image Contents