Briggs & Stratton 13D1-19, 13D1-(19) PPO Installation − Section B, Preinstallation Inspection

Page 8

10 SERIES

OM−05463

 

 

INSTALLATION − SECTION B

Review all SAFETY information in Section A.

Since pump installations are seldom identical, this section offers only general recommendations and practices required to inspect, position, and ar- range the pump and piping.

Most of the information pertains to a standard static lift application where the pump is positioned above the free level of liquid to be pumped.

If installed in a flooded suction application where the liquid is supplied to the pump under pressure, some of the information such as mounting, line configuration, and priming must be tailored to the

specific application. Since the pressure supplied to the pump is critical to performance and safety, be sure to limit the incoming pressure to 50% of the maximum permissible operating pressure as shown on the pump performance curve (see Sec- tion E, Page 1).

For further assistance, contact your Gorman-Rupp distributor or the Gorman-Rupp Company.

Pump Dimensions

See Figure 1 for the approximate physical dimen- sions of this pump.

OUTLINE DRAWING

Figure 1. Pump Models 13D1−19

PREINSTALLATION INSPECTION

a. Inspect the pump and engine for cracks, dents, damaged threads, and other obvious damage.

The pump assembly was inspected and tested be- fore shipment from the factory. Before installation, inspect the pump for damage which may have oc- curred during shipment. Check as follows:

b.Check for and tighten loose attaching hard- ware. Since gaskets tend to shrink after dry- ing, check for loose hardware at mating sur- faces.

INSTALLATION

PAGE B − 1

Page 7 Page 9
Image 8
Page 7 Page 9
Contents GORMAN-RUPP Company D MANSFIELD, Ohio With Parts ListModels Page Table of Contents Introduction Safety Section aInstallation − Section B Troubleshooting − Section DTable of Contents Introduction Safety − Section a Series Installation − Section B Preinstallation InspectionPositioning Pump Suction and Discharge PipingSuction Lines Discharge Lines Recommended Minimum Suction Line Submergence vs. VelocitySeries Operation − Section C PrimingStarting OperationStopping Series Troubleshooting − Section D Priming PrimeTrouble Possible Cause Probable Remedy Pump Stops or Preventive Maintenance Schedule Preventive MaintenancePump Maintenance and Repair Section E Section Drawing Pump Model 13D1−19Parts List Pump Models 13D1−19 From S/N 1259620 upD1−19 Pump Parts Only 13D1−19 Pump Parts Only Pump and Seal Disassembly and Reassembly Series −855 Seal Assembly Lubrication Extent and Duration of Warranty GORMAN-RUPP Company GORMAN-RUPP of Canada Limited

13D1-(19) PPO, 13D1-19 specifications

The Briggs & Stratton 13D1-19,13D1-(19) PPO engine is a versatile power source known for its reliability and performance in various outdoor equipment applications. Designed primarily for use in lawnmowers, pressure washers, and other gardening machinery, the 13D1 series boasts features that cater to both consumer and commercial needs.

One of the standout features of the 13D1-19 engine is its compact design, which allows for easy installation in a variety of equipment types. This space-efficient construction is especially beneficial for manufacturers looking to create lightweight and maneuverable machines. The air-cooled, four-stroke engine configuration provides a balance between power output and fuel efficiency, making it an ideal choice for extended usage without the worry of overheating.

The 13D1-19,13D1-(19) PPO is equipped with a reliable carburetor system that ensures optimal fuel delivery and improved combustion efficiency. This contributes not only to better engine performance but also to reduced emissions, aligning with modern environmental standards. Furthermore, the engine features an efficient ignition system that offers quick starts, even in challenging weather conditions, ensuring that users can rely on it when needed.

Another notable characteristic is the engine's solid construction, featuring durable components designed to withstand the rigors of outdoor work. The low vibration design enhances user comfort during operation, reducing fatigue and allowing for longer working hours without discomfort. Additionally, the engine is designed for easy maintenance, featuring accessible parts for routine checks and repairs, which helps extend its lifespan.

The 13D1-19,13D1-(19) PPO also incorporates advanced technologies such as improved air filtration systems, which enhance performance by ensuring the engine operates with clean air. This reduces wear and tear on internal components, promoting a longer service life.

Overall, the Briggs & Stratton 13D1-19,13D1-(19) PPO engine is an excellent choice for those seeking a powerful, efficient, and reliable engine solution for a wide range of gardening and outdoor equipment. Its combination of durability, user-friendly features, and modern technology makes it a preferred option for both casual users and professionals in the landscaping industry.
Top Page Image Contents