Heath Zenith 52-4477-8 operating instructions Optional Wiring, Master Master

Page 3

OPTIONAL WIRING

This fixture is provided with a sensor rated for 500 Watts. Since the fixture is only rated 100 Watts, 400 Watts of additional lighting may be controlled by this sensor.

When determining what a fixture is rated for, do not simply look at the rating on the lamp in the fixture. Look at the marking which specifies the maximum lamp wattage for which the fixture is suitable.

Once you have selected the fixtures to be connected and determined their maximum ratings,add these ratings up. For instance, if you have 3 fixtures rated 100 Watts, 150 Watts, and 75 Watts respectively, you have a total load of 325 Watts.

Wiring Diagram 1 – When wiring to control a standard light fixture: Strip the motion sensor’s red wire and connect to the standard light’s black wire. Connect all white wires together.Total fixture ratings must not exceed 500 Watts (4.1 A).

Wiring Diagram 2 – When wiring to control another motion sensing light fixture (Master / Slave): Strip the red wire in both light fixtures. Connect the red wire of the controlling (master) fixture to the red and black wires of the controlled (slave) fixture. Connect all white wires together. Total fixture ratings must not exceed 500 Watts (4.1 A).

Wiring Diagram 3 – When wiring so either motion light turns on the both motion lights (Master / Master): Strip the red wire in both light fixtures. Connect the red wire of one fixture to the red wire of the second fixture.Note: In most installations, an additional wire (same gage as exist- ing house wire) will have to be installed in the house to connect the two fixtures as master / master. Connect all white wires together and all black wires together. Total fixture ratings must not exceed 500 Watts (4.1 A).

Black

Green or Bare

White

 

Master

Slave

 

(Standard)

 

 

Red

Red

 

 

 

Black

 

 

Green

 

 

or Bare

 

 

White

 

Wiring Diagram 1

Wiring Diagram 2

 

Master Master

Red

Black

Green or Bare

White

Wiring Diagram 3

598-1285-00



Page 2 Page 4
Image 3
Page 2 Page 4
Contents Horizontal Junction Boxes Only Installation Operating Instructions FeaturesInstallation RequirementsRecommended Grounding Method WiringOptional Wiring MasterMaster Master Set ON-TIME switch to Test Sensitivity dial to Midway Final AssemblyTesting and Adjustments Optional AssemblyOperation Manual ModeUp to 30 ft .1 m varies with surrounding temperature Mode Switching SummaryAdjustment of Coverage Area SpecificationsTroubleshooting No Service Parts Available for this ProductIf you experience a problem, follow this guide Boîtes de jonction horizontales Seulement Instructions dinstallation et mode demploiCaractéristiques ExigencesCâblage Câblage Facultatif Maître SatelliteMaître Maître Assemblage Final Essais ET RéglagesEnsemble facultatif Priorité Manuelle FonctionnementFiche Technique Réglage DE LA Zone DE CouvertureDépannage Aucune pièce de rechange n’est disponible pour ce produitSi vous éprouvez des difficultés, suivez ce guide 598-1285-00 598-1285-00

52-4477-8 specifications

The Heath Zenith 52-4477-8 is an advanced outdoor motion sensor light that combines functionality with cutting-edge technology to provide optimal security and convenience for homes and businesses. Designed for a variety of outdoor applications, this light fixture is perfect for illuminating walkways, driveways, and entrances, enhancing visibility while deterring potential intruders.

One of the standout features of the Heath Zenith 52-4477-8 is its state-of-the-art motion sensor capability. The sensor is capable of detecting movement up to a certain range, allowing for automatic activation of the light when motion is detected. This feature not only saves energy but also provides peace of mind by ensuring that areas around your property are well-lit when needed. The motion sensor allows for customizable settings, including sensitivity adjustments and a timer to control how long the light stays on after activation.

Incorporating LED technology, the Heath Zenith 52-4477-8 offers exceptional brightness while being energy-efficient. LEDs consume significantly less power compared to traditional incandescent bulbs, which translates to reduced electricity bills and a lower carbon footprint. The fixture emits a warm white light, creating a welcoming atmosphere while also ensuring adequate visibility for safety.

Durability is another hallmark of the Heath Zenith brand, and the 52-4477-8 is built to withstand various weather conditions. With a robust construction and high-quality materials, this motion sensor light is designed to resist rain, snow, and other environmental factors, making it a reliable choice for outdoor use.

Installation is simple and straightforward, thanks to the user-friendly design of the Heath Zenith 52-4477-8. The fixture comes with all necessary mounting hardware, allowing homeowners and contractors to easily set it up without professional assistance.

In conclusion, the Heath Zenith 52-4477-8 is an ideal solution for those looking to enhance outdoor safety and security. With its efficient LED lighting, advanced motion sensor technology, robust weather-resistant construction, and easy installation, this fixture offers a perfect blend of performance and convenience. Homeowners can enjoy peace of mind knowing that their property is well-lit and secure with the Heath Zenith 52-4477-8.
Top Page Image Contents