Final Assembly, Testing and Adjustments

Final Assembly

1.Push the wires into the junction box. Make sure the wires from the fixture go through the wire path, and no wires get pinched.

2.Slide the fixture assembly onto the mounting screws.Tighten decorative nuts removed in step 1 of Installation section securely against fixture base.

Decorative Nut

Mounting Screw	Junction Box

3.Install one medium base light bulb (100 Watt maximum).

4.If applicable, place top cover onto fixture and attach using the two decorative nuts (included). Hand tighten only.

5.After completing the tests on page 4, caulk around fixture base with silicone weather sealant.

6.If you will not be installing the optional tail assembly, install the decorative nut onto the bottom of the fixture now.

Optional Assembly

If so equipped, you may install the decorative tail as shown below.

1.Screw hex nut onto bottom of fixture.

2.Screw extension bar into hex nut.

3.Slide tail piece and top trim piece onto exten- sion bar.

4.Slide bottom trim piece (with drain hole) onto extension bar.

5.Install the decorative nut onto extension bar.

Hex Nut

Tail Piece

	Trim (top)
	Trim (bottom with
Decorative Nut	hole)

Testing and Adjustments

1.Turn on the circuit breaker and light switch.

Note: Sensor has a 1 1/2 minute warm up period before it will detect motion. When firstturned on wait 1 1/2 minutes.

2.Set:

ON-TIME switch to TEST SENSITIVITY dial to Midway

TEST 1 5 10 MIN	LO - M - HI
ON-TIME	SENSITIVITY

598-1285-00

52-4477-8 specifications

The Heath Zenith 52-4477-8 is an advanced outdoor motion sensor light that combines functionality with cutting-edge technology to provide optimal security and convenience for homes and businesses. Designed for a variety of outdoor applications, this light fixture is perfect for illuminating walkways, driveways, and entrances, enhancing visibility while deterring potential intruders.

One of the standout features of the Heath Zenith 52-4477-8 is its state-of-the-art motion sensor capability. The sensor is capable of detecting movement up to a certain range, allowing for automatic activation of the light when motion is detected. This feature not only saves energy but also provides peace of mind by ensuring that areas around your property are well-lit when needed. The motion sensor allows for customizable settings, including sensitivity adjustments and a timer to control how long the light stays on after activation.

Incorporating LED technology, the Heath Zenith 52-4477-8 offers exceptional brightness while being energy-efficient. LEDs consume significantly less power compared to traditional incandescent bulbs, which translates to reduced electricity bills and a lower carbon footprint. The fixture emits a warm white light, creating a welcoming atmosphere while also ensuring adequate visibility for safety.

Durability is another hallmark of the Heath Zenith brand, and the 52-4477-8 is built to withstand various weather conditions. With a robust construction and high-quality materials, this motion sensor light is designed to resist rain, snow, and other environmental factors, making it a reliable choice for outdoor use.

Installation is simple and straightforward, thanks to the user-friendly design of the Heath Zenith 52-4477-8. The fixture comes with all necessary mounting hardware, allowing homeowners and contractors to easily set it up without professional assistance.

In conclusion, the Heath Zenith 52-4477-8 is an ideal solution for those looking to enhance outdoor safety and security. With its efficient LED lighting, advanced motion sensor technology, robust weather-resistant construction, and easy installation, this fixture offers a perfect blend of performance and convenience. Homeowners can enjoy peace of mind knowing that their property is well-lit and secure with the Heath Zenith 52-4477-8.