Fedders A6V05S2B Casement Window Installation, Directing Airflow, Cleaning Air Filter

Page 5

Casement Window Installation

This air conditioner is designed to fit into most casement type windows. As shipped from factory, unit will fit into a minimum window opening 15 1/2” wide and 21” high. The preferred method of installation is through a closed or stationary window. Installation in an open window frame is also possible where open window can be secured to outside of building or removed completely.

1.Closed or Stationary Window: Install unit in stationary sash to avoid crank handles or window latches. If unit is to be installed in or next to a movable sash, it may be necessary to remove catch, handle or both. Remove crank handle and secure window in closed position. Remove glass panes and separating strips to a height sufficient to mount unit.

2.Open Window Frame: Remove crank mechanism and catch handles. Fold window sash back against exterior wall of building and secure, or remove completely where possible.

3.A filler panel will be required at side of unit when installed in windows having width greater than 15 1/2”. Filler panel should be made from 3/4” thick wood securely anchored to one side of opening so that 15 1/2” wide opening is provided. Filler panel should run full length of window. Paint to suit.

4.Install unit in same manner as described for sliding windows.

Installation in Wood Sliding or Wood Casement Windows

1.For wood frame casement windows, it is necessary to construct a frame, using at least 1” thick wood with a 15 1/2” wide opening.

2.Paint frame and fasten it securely, sealing it into window opening.

3.Install unit into frame following procedures for metal sliding and casement windows.

These installations are also typical, and since styles and sizes of casement windows vary widely, it is advisable to have unit installed by someone skilled in this type of installation. The dealer selling these units can recommend or supply qualified people to install your new unit.

INSTALLATION

WINDOW INSTALLATON

Fig. 7

 

 

 

 

 

E

 

 

D

E

 

 

 

 

 

 

D

B

C

 

 

 

 

 

A

 

 

 

A

Foam Seal

D

Drilled holes

B

Channel

E

3/8” long screw

C Speed Clip

 

 

Fig.8

 

 

C

 

A

B

D

 

 

 

 

 

E

A Inlet Grill

D Adjustable louvers

B Air filter

E Airflow levers

C Front Panel

 

Directing Airflow Fig.8

Air conditioner is engineered with adjustable louvers to direct discharge airflow.

Louvers are manually adjusted by moving levers in direction of desired airflow.

Cleaning Air Filter Fig.8

When air conditioner is operating, indoor air is filtered and refiltered continuously trapping airborne dirt and dust in the washable filter. Therefore, the filter should be inspected and cleaned weekly.

1.Turn Master Control to OFF.

2.Grasp both sides near top of inlet grill and pull forward. Inlet grill will pivot forward to reveal air filter.

3.Remove air filter from tabs.

4.Carefully wash air filter with a mild detergent and warm water. Rinse with clear water, squeeze dry and replace.

5.Replace inlet grill.

6.Return Master Control to desired operation.

Note: Failure to keep air filter clean will result in poor air circulation. DO NOT operate without filter. This can render the unit inoperative.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Pour consultation ultérieure For Future ReferencePara referencia futura Important Grounding Requirements InstallationOr email customerservice@fedders.com Installation Parts Kit Fastener Identification Sliding Window InstallationBefore you start Tools NeededFiller Panel Cleaning Air Filter Casement Window InstallationInstallation in Wood Sliding or Wood Casement Windows Directing AirflowElectronic Control Panel Occurrence Possible Cause Solutions Troubleshooting GuideService Insufficient CoolingRoom Air Conditioner Warranty How to Obtain Warranty Service or PartsWarranty ExceptionsDe arco eléctrico Cordón con dispositivo de detecciónRiesgo de Choque Eléctrico InstalacionRequisitos de la ventana Instalación en ventana corredizaHerramientas necesarias Identificación de Partes De InstalaciónInstalacion Limpieza del filtro de aire Fig Instalación en ventana de hoja batienteOrientación de la corriente de aire Fig Control de alimentación Control del reloj Pantalla de configuración de temperatura/relojControles de temperatura/hora del reloj Control de modoServicio Problema Causa Posible SolucionesLocalización y Solución de Averías Garantía del acondicionador de aire Cómo obtener servicio o piezas bajo la garantíaServicio Y Garantia ExcepcionesCordon électrique avec dispositif de détection darc Risque de choc électriqueCaractéristiques des fenêtres Contenu de l’ensemble d’installation ’té Nom de la pièceMontage dans une fenêtre coulissante Outillage nécessaireJoint de mousse Nettoyage du filtre à air Montage dans une fenêtre à battantsOrientation de l’air Commandes de la température et du nombre d’heures Commande marche/arrêtCommande du mode Commande de la vitesse de ventilationSymptôme Causes possibles Solutions Guide de diagnosticTélécommande de Climatiseur DépannageGarantie du climatiseur Pour les modèles installés en dehors de l’Amérique du NordGarantie 800 332-6658 ou en écrivant àPage Features / Características / Caractéristiques

A6V05S2B specifications

The Fedders A6V05S2B is a versatile and efficient air conditioning unit that has garnered attention for its impressive performance and innovative features. Designed to provide optimal comfort in various environments, this model is ideal for both residential and commercial applications.

One of the main features of the Fedders A6V05S2B is its high cooling capacity. With a cooling output of 5,000 BTU, this unit can effectively cool rooms up to 200 square feet, making it suitable for living rooms, small offices, and bedrooms. The unit's energy efficiency is another defining characteristic, boasting an Energy Efficiency Ratio (EER) that meets or exceeds industry standards. This means lower electricity bills and reduced environmental impact, making it an attractive choice for eco-conscious consumers.

The unit employs advanced technologies such as a rotary compressor and a refrigerant that complies with environmental regulations. The rotary compressor ensures a quieter operation while maintaining a consistent temperature, enhancing user comfort. Additionally, the Fedders A6V05S2B is designed with a convenient electronic control system that allows users to easily adjust settings. The digital display and remote control make operating the air conditioner effortless.

Another significant feature is the multiple cooling and fan speeds available with the unit. Users can select from high, medium, and low fan speeds, allowing for customized airflow tailored to individual preferences. The unit also includes a programmable timer that can be set to turn the AC on or off at specific times, promoting convenience and energy savings.

Moreover, the Fedders A6V05S2B is equipped with a washable air filter, which helps maintain indoor air quality by trapping dust, allergens, and other particles. Regular maintenance of the filter ensures optimal performance and longevity of the unit.

The sleek design of the A6V05S2B allows it to blend seamlessly into various decor styles, while the lightweight construction facilitates easy installation. With a range of features designed for user convenience and comfort, the Fedders A6V05S2B stands out as an excellent choice for those seeking reliability and efficiency in their cooling solutions.
Top Page Image Contents