Pirelli DRG A225G manual Hardware Installation, Positioning the router

Page 11

DISCUS™ DRG A225G

HARDWARE INSTALLATION

Positioning the router

You should place the Router in such a location to ensure that:

It is located near an electrical outlet and a phone wall socket

Water or moisture cannot enter the case of the unit

It is out of direct sunlight and away from sources of heat

The cabling is away from power lines, fluorescent lighting fixtures, and sources of electrical noise such as radios, transmitters and broadband amplifiers.

It is centrally located with respect to the wireless devices that will be connected to the Router. A suitable location might be on top of a high shelf to ensure the maximum coverage for all connected devices.

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

13

Image 11
Contents Page Discus DRG A225G Contents Status Safety Information Certifications Introduction Package ContentsDescription Sample Network LED Front PanelUSB Rear PanelPort Description Port DescriptionPositioning the router Hardware InstallationPhone Cable Connection Connecting the routerEthernet Cable Connection MAC WindowsPhones Connection Connecting the phonesTo go on with the Setup wizard, press the Next button Setup WizardFirewall WirelessISP Parameters Firewall Panel ConfirmParameter Description WirelessChannel and Ssid WPA/WPA2 and WPA2 Only Wireless SecurityWPA/WPA2 parameters settings 802.1x Authentication parameters WEP WEPDiscus DRG A225G Information StatusSafety Information CE Mark CertificationsWeee 100BASE-TX Glossary10BASE-T DSL DhcpMAC IeeeISP LANSsid VPI TCP/IPTCP VCIWPA Wireless ClientWizard WlanDiscus DRG A225G