Pirelli DRG A225G manual WPA/WPA2 parameters settings

Page 21

DISCUS™ DRG A225G

places Wired Equivalent Privacy (WEP) and the other security features of the original IEEE 802.11 standard. The goal of WPA2 certification is to support the additional mandatory security features of the IEEE 802.11i standard that are not already included for products that support WPA.

FIGURE 11. Security

In order to configure this scenario refer to Table 3.

Table 3 WPA/WPA2 parameters settings

Parameter

Description

Authentication

Choose 802.1x or Pre-shared Key to use as the au-

 

thentication:

 

• 802.1x: for the enterprise network with a RADIUS

 

server. Refer to Table 4 802.1x Authentication pa-

 

rameters.

 

Pre-shared key: for the SOHO network environ-

 

ment without an authentication server.method.

Pre-shared key type

Select the key type to be used in the Pre-shared

 

Key.

Pre-shared Key

Type in the key here.

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

23

Image 21
Contents Page Discus DRG A225G Contents Status Safety Information Certifications Introduction Package ContentsDescription Sample Network LED Front PanelUSB Rear PanelPort Description Port DescriptionPositioning the router Hardware InstallationPhone Cable Connection Connecting the routerEthernet Cable Connection MAC WindowsPhones Connection Connecting the phonesTo go on with the Setup wizard, press the Next button Setup WizardWireless ISP ParametersFirewall Firewall Panel ConfirmWireless Channel and SsidParameter Description WPA/WPA2 and WPA2 Only Wireless SecurityWPA/WPA2 parameters settings 802.1x Authentication parameters WEP WEPDiscus DRG A225G Information StatusSafety Information CE Mark CertificationsWeee Glossary 10BASE-T100BASE-TX DSL DhcpISP IeeeLAN MACSsid TCP TCP/IPVCI VPIWizard Wireless ClientWlan WPADiscus DRG A225G