Pirelli DRG A225G manual Sample Network

Page 7

DISCUS™ DRG A225G

It implements an “always-on” high speed Asymmetric Digital Subscriber Line (ADSL2/2+) connection to the telephone line on the WAN side, as well several local connectivity technologies on the LAN side:

Four switched 10/100 Base-TX Ethernet ports

One Universal Serial Bus 1.1 (USB) connection to a host PC

One IEEE 802.11b/g Wireless LAN access point

Two FXS ports to analog phones

Figure 1 shows a sample network.

Figure 1 Sample Network

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

9

Image 7
Contents Page Discus DRG A225G Contents Status Safety Information Certifications Introduction Package ContentsDescription Sample Network LED Front PanelUSB Rear PanelPort Description Port DescriptionPositioning the router Hardware InstallationPhone Cable Connection Connecting the routerEthernet Cable Connection MAC WindowsPhones Connection Connecting the phonesTo go on with the Setup wizard, press the Next button Setup WizardISP Parameters WirelessFirewall Firewall Panel ConfirmChannel and Ssid WirelessParameter Description WPA/WPA2 and WPA2 Only Wireless SecurityWPA/WPA2 parameters settings 802.1x Authentication parameters WEP WEPDiscus DRG A225G Information StatusSafety Information CE Mark CertificationsWeee 10BASE-T Glossary100BASE-TX DSL DhcpMAC IeeeISP LANSsid VPI TCP/IPTCP VCIWPA Wireless ClientWizard WlanDiscus DRG A225G