Pirelli DRG A225G manual Windows, Mac

Page 14

DISCUS™ DRG A225G

To connect the USB cable, follow the procedure according to your Operating System:

WINDOWS

1.Connect one end of the USB cable into the USB port of your PC

2.Browse till x:\USB driver folder (where “x” is the CD-ROM drive unit letter); launch the “setup.exe” executable (“x:\USB driver\setup.exe”) and follow setup instructions

3.The setup software will invite you to plug the other end of the USB cable into the USB port on the rear of the Router

MAC 10.x

1.Connect one end of the USB cable into the USB port of your PC

2.Connect the other end of the USB cable into the USB port on the rear of the Router. The Operating System will automatically recognize the device

FIGURE 3. USB Cable Connection

Don’t plug the other end of the USB cable until setup software will ask you to do it.

© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.

16

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Discus DRG A225G Contents Status Safety Information Certifications Package Contents IntroductionDescription Sample Network Front Panel LEDRear Panel USBPort Description Port DescriptionHardware Installation Positioning the routerConnecting the router Phone Cable ConnectionEthernet Cable Connection Windows MACConnecting the phones Phones ConnectionSetup Wizard To go on with the Setup wizard, press the Next buttonFirewall WirelessISP Parameters Confirm Firewall PanelParameter Description WirelessChannel and Ssid Wireless Security WPA/WPA2 and WPA2 OnlyWPA/WPA2 parameters settings 802.1x Authentication parameters WEP WEPDiscus DRG A225G Status InformationSafety Information Certifications CE MarkWeee 100BASE-TX Glossary10BASE-T Dhcp DSLLAN IeeeISP MACSsid VCI TCP/IPTCP VPIWlan Wireless ClientWizard WPADiscus DRG A225G
Top Page Image Contents