DISCUS™ DRG A225G
WIRELESS
The gateway can be quickly configured as a wireless access point by setting the service set identifier (SSID) and channel number. It also supports encryption and client filtering.
Channel and SSID
This page allows you to define the SSID and the Channel ID for wireless con- nection. These parameters are used for the mobile stations to connect to this access point. You must specify a common radio channel and SSID (Service Set ID) to be used by the Router and all of its wireless clients. Be sure you config- ure all of its clients to the same values
Table 2 Channel and SSID Parameters Table
Parameter | Description |
|
|
SSID | Service Set ID. The SSID must be the same on the |
| VoIP Router and all of its wireless clients. |
SSID Broadcast | Enable or disable the broadcasting of the SSID. |
| Disabling SSID broadcast will provide increased |
| security by hiding the SSID of your wireless net- |
| work. |
Wireless Mode | This device supports both 11g and 11b wireless |
| networks. Make your selection depending on the |
| type of wireless network that you have. You may |
| use “Mixed (11b+11g)” to provide compatibility with |
| both 11b and 11g wireless clients. |
Channel | The radio channel used by the wireless router and |
| its clients to communicate with each other. This |
| channel must be the same on the VoIP Router and |
| all of its wireless clients.The VoIP Router will |
| automatically assign itself a radio channel, or you |
| may select one manually. |
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
21