Oki C5510 instruction manual Hazard Warning Risk from Moving Parts

Page 6

HAZARD

WARNING: Risk of Burns

What Could Happen

Touching exposed metal such as the compressor head or outlet tubes, can

result in serious burns.

How To Prevent It

Never touch any exposed metal parts on compressor during or immediately after operation. Compressor will remain hot for several minutes after operation.

Do not reach around protective shrouds or attempt maintenance until unit has been allowed to cool.

HAZARD WARNING: Risk from Moving Parts

What Could Happen

Moving parts such as the pulley, flywheel, and belt can cause serious injury if they come into contact with you or your clothing.

Attempting to operate compressor with damaged or missing parts or attempting to repair compressor with protective shrouds removed can expose you to moving parts and can result in serious injury.

How To Prevent It

Never operate the compressor with guards or covers which are damaged or removed.

Any repairs required on this product should be performed by authorized service center personnel.

HAZARD

WARNING: Risk of Falling

What Could Happen

A portable compressor can fall from a table, workbench, or roof causing damage to the compressor and could result in serious injury or death to the operator.

How To Prevent It

Always operate compressor in a stable secure position to prevent accidental movement of the unit. Never operate compressor on a roof or other elevated position. Use additional air hose to reach high locations.

A10260

6- ENG

Image 6
Contents Oillube Single-Stage Portable Compressor Safety Guidelines Definitions Important Safety InstructionsHazard Attachments & Accessories Electricity. Like any other electrically Hazard Warning Risk from Moving Parts Equip area of operation with a fire extinguisher Glossary SpecificationsAccessories Duty CycleTo Install Handle AssemblyTools Required for Assembly UnpackingTo Assemble Wheels Assemble Rubber FeetTo Add Oil To Pump Installation Location of the Air CompressorExtension Cords Voltage and Circuit Protection120/240 Dual Voltage Motor Operation Know Your Air CompressorDescription of Operation How to Use Your Unit Before StartingHow to Start Before Each Start-UpMaintenance Customer ResponsibilitiesChecking ChangingAir Filter Inspection and Replacement To Replace BeltMotor Pulley/Flywheel Alignment Service and Adjustments To Replace or Clean Check ValveTo Replace Regulator Storage Troubleshooting Problem Cause CorrectionWhile accessory is being Problem Cause Correction Problem Cause Correction Limited Warranty