Bench Mounting |
| Assembly |
|
|
|
|
|
|
the base of this machine has mounting holes that allow it to be fastened to a workbench or other mounting surface to prevent it from moving during operation and causing accidental injury or damage.
the strongest mounting option is a "through mount" (see example below) where holes are drilled all the way through the
Hex |
Bolt |
Flat Washer |
Machine Base |
Workbench |
Flat Washer |
Lock Washer |
Hex Nut |
Figure 5. Example of a "Through Mount" setup.
another option is a "direct mount" (see example below) where the machine is secured directly to the workbench with lag screws and washers.
The Model T25688 comes from the factory almost fully assembled. All that is required for assem- bly is attaching the crank handle to the handle. Thread the crank handle into the small end of the crank and tighten, as shown in Figure 7.
Figure 7. Assembly.
Lag Screw
Flat Washer
Machine Base
Workbench
Figure 6. Example of a "Direct Mount" setup.
Model T25688 (Mfg. Since 09/13) |