SECTION 3: OPERATIONS
To reduce your risk of serious injury, read this entire manual bEfORE using machine.
Damage to your eyes and hands could result from using this machine with-
out proper protective gear.
Always wear safety glasses
and leather gloves, when operating this machine.
Basic Controls
Use Figures
Thickness Adjustment Knob: Raises and low- ers the bottom roller to adjust for thicknesses of different workpieces.
Radius Adjustment Knob: Raises and lowers the rear roller to create smaller and larger radius bends.
Crank: Turns the rollers, feeding the workpiece through the machine.
This machine and its com- ponents are heavy. Get lift- ing help to reduce the risk of injury.
If you are not experienced with this type of machine, WE STRONgLy REcOMMEND that you seek additional training outside of
Thickness
Adjustment
Knob
Crank 
Radius
Adjustment
Knob
this manual. Read books/magazines or get formal training before beginning any proj- ects. Regardless of the content in this sec- tion, grizzly Industrial will not be held liable for accidents caused by lack of training.
Model T25688 (Mfg. Since 09/13)
Figure 8. Adjustment knobs.
Removable Bushing: Slides out allowing the release of the top roller to facilitate the unloading of cylindrical workpieces.
Removable Bushing