INTRODUCTION
Machine Description |
| Manual Accuracy |
|
|
|
|
|
|
A slip roll is a machine used to flatten and create
The T25688 can quickly adjust to create cone, spiral or continuous cylindrical shapes with sheet metal up to 22 gauge. Workpieces can be bent to job specification, straightened, or even slightly flattened. In addition to sheet metal, this slip roll has 1⁄8", 3⁄16", and 1⁄4" grooves for precise wire/rod bending.
The T25688 features a
Contact Info
We stand behind our machines. If you have any questions or need help, use the information below to contact us. Before contacting, please get the serial number and manufacture date of your machine. This will help us help you faster.
Grizzly Technical Support 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570)
Email: techsupport@grizzly.com
We want your feedback on this manual. What did you like about it? Where could it be improved? Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA
Email: manuals@grizzly.com
We are proud to provide a
We made every effort to be exact with the instruc- tions, specifications, drawings, and photographs contained inside. Sometimes we make mistakes, but our policy of continuous improvement also means that sometimes the machine you receive will be slightly different than what is shown in the manual.
if you find this to be the case, and the difference between the manual and machine leaves you confused about a procedure, check our website for an updated version. We post current manuals and manual updates for free on our website at www.grizzly.com.
alternatively, you can call our technical Support for help. before calling, please write down the Manufacture Date and Serial Number stamped into the machine id label (see below). this infor- mation helps us determine if updated documenta- tion is available for your machine.
manufacture date |
Serial number |
Model T25688 (Mfg. Since 09/13)