Grizzly T25688 owner manual Removing Workpiece, To remove cylindrical workpieces

Page 20

Removing Workpiece

To remove cylindrical workpieces:

1.Slide the removable bushing outward. This will release the top roller from the stand (see Figure 26).

Removable Bushing

Slide Out

To Release

Figure 26. Removable bushing release.

2.Slide the top roller out from the base (see Figure 27). Remove the workpiece from the top roller, then slide the top roller back into the base.

Figure 27. Releasing top roller.

-18-

3.Move the top roller back into position and slide the removable bushing in to secure the top roller (see Figure 28).

Removable Bushing

Slide In

To Secure

Figure 28. Securing top roller.

Model T25688 (Mfg. Since 09/13)

Image 20

Contents Model T25688 24 Slip Roll Page Table of Contents Contact Info IntroductionMachine Description Manual Accuracy Identification Identification ListMachine Data Sheet SAfETY Safety Instructions for MachineryPage Additional Safety for Slip Rolls UnpackingInventory SetupNeeded for Setup Cleanup Before cleaning, gather the followingSite Considerations Basic steps for removing rust preventativeMachine Base Workbench Bench Mounting AssemblyWorkbench Operations Basic ControlsTo prepare the slip roll for use PreparationFlat Rolling Creating Bends Raising bottom rollerSetting the radius Creating Cylinders To create a cylinderFigures Bending Wire To use the wire groovesRemoving Workpiece To remove cylindrical workpiecesH5503-Electric Sheet Metal Shear AccessoriesT23094-Pneumatic Sheet Metal Shear Maintenance CleaningSchedule LubricationSymptom Possible Cause Possible Solution ServiceTroubleshooting Parts DescriptionWarranty Card CommentsGrizzly INDUSTRIAL, INC BOX BELLINGHAM, WAWarranty & Returns