Line Voltage Connections

920-087-04

Appendix A: Electrical Wiring for 265 Volt Models

NOTE: It is recommended that the PXSB subbase assembly, the PXCJ conduit kit and the PXDS disconnect switch be installed on all hardwired units. If installing a ﬂush-ﬂoor mounted unit, make provisions for all the line voltage power leads and conduit to be removed for ease of maintenance and service to the chassis.

To install the line voltage power leads and conduit to the chassis, follow the instructions below.

1.Remove the four control box retaining screws (A) and open the control box.

2.Pull the chassis power lead wires (B) (located on the bottom- right side of the control box) through the plastic bushing so they are located inside the control box.

3.Remove the plastic bushing.

4.Route the line voltage power leads through the hole where the plastic bushing was located, and secure its conduit (use a 1/2" straight conduit connector, with the locknut on the inside of the control box.)

5.Make the appropriate electrical connections within the control box, then secure the box on the chassis. Detailed instructions are included with the installation instructions for the conduit kit (PXCJ).

6.Route the line voltage power conduit from the control box straight down the right front to the bottom side of the chassis. This will allow the front cover to be installed without interference with the electrical conduit.

Figure 15

Inside back of control panel cover.

Screws

Fuse holder

ELECTRIC SHOCK HAZARD! Turn off electric power before service or installation. All electrical connections and wiring MUST be installed by a qualiﬁed electrician and conform to the National Electrical Code and all local codes which have jurisdiction. Failure to do so can result in property damage, personal injury and/or death.

HEAT PUMPS specifications

Friedrich Heat Pumps are designed to provide efficient heating, cooling, and dehumidification solutions for various applications, including residential, commercial, and industrial settings. Renowned for their innovative technology and commitment to sustainability, Friedrich has become a recognized name in the HVAC industry.

One of the primary features of Friedrich Heat Pumps is their energy efficiency. These systems utilize advanced inverter technology, allowing the compressor to adjust its speed according to current heating or cooling demands. This leads to significant energy savings compared to traditional systems, which operate at a constant speed. By maintaining a more consistent indoor temperature, Friedrich Heat Pumps reduce energy consumption and lower utility bills.

In addition to energy efficiency, Friedrich offers a variety of models to suit different needs. The range includes air-source heat pumps, which extract heat from the outdoor air, and geothermal heat pumps, which utilize the stable temperatures found underground. This versatility allows users to select a system that best fits their specific climate conditions and application requirements.

Friedrich Heat Pumps also feature smart technology integration, making them a perfect choice for modern smart homes. Many models come equipped with Wi-Fi capabilities, allowing users to control their system remotely through a smartphone app. This feature not only enhances convenience but also allows for enhanced energy management, enabling users to monitor and adjust their heating and cooling schedules for optimal efficiency.

Another notable characteristic is their quiet operation. Friedrich Heat Pumps are engineered with noise-reducing features, making them suitable for residential areas where noise may be a concern. This focus on quiet performance ensures that users can enjoy a comfortable indoor environment without disruptive sound.

Durability and reliability are also key attributes of Friedrich Heat Pumps. Built with high-quality materials and rigorous testing processes, these systems are designed to withstand varying environmental conditions and provide long-lasting performance. Regular maintenance is further simplified with easy access to essential components, prolonging the system's lifespan.

In conclusion, Friedrich Heat Pumps stand out for their energy efficiency, innovative technologies, and superb performance characteristics. With options suitable for a wide array of applications, they are an excellent choice for anyone looking to enhance their indoor climate control while reducing their environmental footprint. Their advanced features, silent operation, and reliability make them a preferred option for modern heating and cooling solutions. Whether for residential or commercial use, Friedrich Heat Pumps offer a perfect blend of comfort, efficiency, and sustainability.