Wall Sleeve Installation Instructions Pdxws

920-087-04

Wall Sleeve Installation Instructions (PDXWS)

NOTE: Insure that the unit is only installed in a wall structurally adequate to support the unit including the sleeve, chassis and accessories. If the sleeve projects more than 8" into the room, a subbase or other means of support MUST be used. Please read these instructions completely before attempting installation.

Figure 5

Typical Wall Sleeve Installation

					.
	42¼"			min
	42¼"
		cm)
	3
	.
Lintel to support masonry walls	(107
Lintel to support masonry walls
10"
(25.4 cm)
max.
				13¾"
		(34.
			9		cm)
					cm)

16¼" (41.3 cm)

50"	(127

Electrical receptacle

	.
	n
cm)	mi
cm)

Insulation

Electrical receptacle

Wall opening	Wall sleeve
	Insulation

Smooth side of screw clip facing into room

Note: All 230/208V units are manufactured with a 60" power cord. The receptacle locations above must be followed to ensure proper connections.

For Deep Wall Installation See Section II

The following instructions apply ONLY to walls less than 13 1/4" in depth.

1.From inside the building, position the wall sleeve in the opening and push it through the wall so it protrudes at least 1/4" on the outside, note Figure 5.

2.Position the wall sleeve with a slight tilt towards the outside to facilitate condensate drainage. It should be level side-to- side and the front should be 1/4 bubble higher than the back. DO NOT allow any pitch toward the inside.

Electrical shock hazard.

Turn electric power OFF at the fuse box or service panel before making any electrical connections and ensure a proper ground connection is made before connecting line voltage. Failure to do so can result in property damage, personal injury and/or death.

HEAT PUMPS specifications

Friedrich Heat Pumps are designed to provide efficient heating, cooling, and dehumidification solutions for various applications, including residential, commercial, and industrial settings. Renowned for their innovative technology and commitment to sustainability, Friedrich has become a recognized name in the HVAC industry.

One of the primary features of Friedrich Heat Pumps is their energy efficiency. These systems utilize advanced inverter technology, allowing the compressor to adjust its speed according to current heating or cooling demands. This leads to significant energy savings compared to traditional systems, which operate at a constant speed. By maintaining a more consistent indoor temperature, Friedrich Heat Pumps reduce energy consumption and lower utility bills.

In addition to energy efficiency, Friedrich offers a variety of models to suit different needs. The range includes air-source heat pumps, which extract heat from the outdoor air, and geothermal heat pumps, which utilize the stable temperatures found underground. This versatility allows users to select a system that best fits their specific climate conditions and application requirements.

Friedrich Heat Pumps also feature smart technology integration, making them a perfect choice for modern smart homes. Many models come equipped with Wi-Fi capabilities, allowing users to control their system remotely through a smartphone app. This feature not only enhances convenience but also allows for enhanced energy management, enabling users to monitor and adjust their heating and cooling schedules for optimal efficiency.

Another notable characteristic is their quiet operation. Friedrich Heat Pumps are engineered with noise-reducing features, making them suitable for residential areas where noise may be a concern. This focus on quiet performance ensures that users can enjoy a comfortable indoor environment without disruptive sound.

Durability and reliability are also key attributes of Friedrich Heat Pumps. Built with high-quality materials and rigorous testing processes, these systems are designed to withstand varying environmental conditions and provide long-lasting performance. Regular maintenance is further simplified with easy access to essential components, prolonging the system's lifespan.

In conclusion, Friedrich Heat Pumps stand out for their energy efficiency, innovative technologies, and superb performance characteristics. With options suitable for a wide array of applications, they are an excellent choice for anyone looking to enhance their indoor climate control while reducing their environmental footprint. Their advanced features, silent operation, and reliability make them a preferred option for modern heating and cooling solutions. Whether for residential or commercial use, Friedrich Heat Pumps offer a perfect blend of comfort, efficiency, and sustainability.