Ryobi R163K manual Features, Product Specifications, ON/OFF Switch, Chip Shield

Page 8

FEATURES

No Load Speed	25,000 r/min (RPM)
Input	120 V, 60 Hz, AC only, 8.5 A

Lock lever

spindle lock

depth

adjustment knob

lED

worklightSquick release button

handle

Fig. 1

Image 8

Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Work Area SafetyElectrical Safety Personal SafetySpecific Safety Rules ServiceSymbols Name DESIGNATION/EXPLANATIONService Symbol Signal MeaningCord Length Wire Size A.W.G ElectricalDouble Insulation Electrical ConnectionFeatures Product SpecificationsON/OFF Switch Chip ShieldAssembly REMOVING/INSTALLING Router Base AdjustmentsOperation ApplicationsInstalling/REMOVING bits To install the bitLED Worklight To remove the bitSee Figures 5 SETting Depth of CUTSelectING Depth of CUT To make through table adjustments Turning the router on and offOperating the router Internal routingEdge routing Straight Edge Clamp WorkpieceFreehand routing Edging with pilot bitWork Router Pilot TOP Edge Shaping Routerguide Work Pilot Whole Edge ShapingDirection of Feed and Thrust Proper Rate of FeedSee Figures 12 Proper CuttingToo fast Too slow Feeding Too FastFeeding Too slow Adjusting Lock lever Tension Depth of CUTSee Figures 16 To TightenMaintenance AccessoriesGeneral Maintenance Cleaning the ColletService Model NO. and Serial no