| SPECIFICATIONS |
Plunge Depth | 0 - 2 in. (0 - 5.08 cm) |
Collet | 1/2 in. (12.7 mm) |
Adaptor | 1/4 in. (6.35 mm) |
Peak Horsepower | 2 |
Input | 120 Volts, 60 Hz, AC Only, 10.0 Amperes |
No Load Speed | 15,000 - 23,000 RPM |
Power Cord | 10 ft. (3 m) |
Net Weight | 8.5 lbs. (3.86 kg.) |
|
|
| UNPACKING |
|
|
INSTRUCTIONS
Your router has been shipped completely assembled.
■Carefully remove the tool and accessories from the box. Make sure that all items listed in the packing list are included.
■Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
■Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
■If any parts are damaged or missing, please call
PACKING LIST
Plunge Router
Collet
Adaptor
15/16 in. (23.8 mm) Wrench
Operator’s Manual
NOTE: The screws and the optional depth control knob must be used when mounting your router to a router table. They are the only screws that will secure your router to a router table properly.
WARNING:
If any parts are missing do not operate your tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
APPLICATIONS
Use your router only for the purposes listed below:
■Routing grooves, shaping edges, freehand designs, etc. in wood.
■Chamfering, rabbeting, dadoing, and dovetailing in wood.
■Routing edges on laminates.
6