ACCESSORIES
OPTIONAL STRAIGHT GUIDE
An optional straight guide, part number 6090080, is available and may be purchased for use with your router.
OPTIONAL DEPTH CONTROL KNOB
An optional depth control knob, part number 4830175, is available, which allows you to easily adjust the depth of cut when using the router mounted upside down to a router table.
ROUTER TABLE
When mounting your router to a router table, use the two
WARNING:
When using a UL listed router table, large router bits should be used for edging only. Do not use router bits that are larger in diameter than the opening in the router base for any purpose. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not use with router tables that are not UL listed and that fail to conform to safe woodworking prac- tices and offer proper guarding for the cutter. Failure to comply can result in an accident causing possible serious injury.
WARNING:
The use of this router in table mounted applications requires the use of the optional depth control knob. Failure to use this optional depth control knob could result in an accident and possible serious personal injury.
23