Energy Tech Laboratories LB480, LB360, LB300, LB600 Unit Mounting Dimensions, Corner Weights

			035-18496-000-C-1102
TABLE 3: UNIT MOUNTING DIMENSIONS
LA/LB		DIMENSIONS, INCHES
UNIT	AX	BX	CX
300	69-1/4	49-1/16	26-5/8
360	69-1/4	49-1/16	26-5/8
480	84	50-9/16	34

MOUNTING

The evaporator blower may be suspended from the joists with isolation type hangers or hooks. Suspension accessory 1HH0403, which includes three suspension channels and hardware, may be ordered separately. The channels extend

across the evaporator coil section, the heating coil section (if included) and the blower section. Each channel is to be bolted to each section as shown in 9.

TABLE 4: CORNER WEIGHTS

UNIT-	Unit Weight (Lbs.)
MODEL	Shipping	Operation	Configuration	A	B	C	D
LA300	1180	1125	HORIZONTAL	276	317	285	247
			VERTICAL	262	301	301	262
LB360	1180	1146	HORIZONTAL	281	323	290	252
			VERTICAL	266	307	307	266
LB480	1510	1426	HORIZONTAL	348	414	361	303
			VERTICAL	292	348	427	359
LB600	-	1640	HORIZONTAL	451	386	370	433
			VERTICAL	484	414	342	400

TABLE 5: ACCESSORY OPERATING WEIGHT DISTRIBUTION (LBS)*

ACCESSORY	LA300	LB360	LB480	LB600
BASE†	25	25	30	45
HOT WATER COIL	35	35	45	35
STEAM COIL 1 ROW	30	30	35	50

*. These weights should be added to each point load (W1 through W6) in table 5.

† . This accessory can only be applied on units installed in the vertical position.

12 Unitary Products Group