Multiquip SFG10E manual Decals

CS8-5050

DECALS

WARNING

EAR AND EYE

PROTECTION 1 REQUIRED

SP8-5040

WARNING

3

KEEP

GUARDS IN

PLACE

SP8-5050

DECALS

	GREASE DRIVESHAFT BEARINGS
	EVERY 2 HOURS OF OPERATION OR
	AS REQUIRED TO MINIMIZE RISK OF
2	GREASE CONTAMINATION.
	CONTAMINATED GREASE WILL	2
	REDUCE BEARING SERVICE LIFE.
	CONSULT OPERATOR MANUAL FOR
	DETAILED LUBRICATION
	PROCEDURES.
	SP8-5061

WARNING
BEFORE HOISTING THIS MACHINE	4
CONSULT WITH THE APPLICABLE OPERATOR
MANUAL. IMPROPER HOISTING
PROCEDURES CAN RESULT IN PROPERTY
DAMAGE AND/OR PERSONAL INJURY.
CS8-5050

5

START MOTOR: ROTATE HANDLE TOWARD OPERATOR		OFF
STOP MOTOR: ROTATE HANDLE AWAY FROM OPERATOR OR RELEASE
ON/OFF CONTROL IS SPRING LOADED TO OFF POSITION. DO NOT OPERATE	ON
MACHINE IF CONTROL DOES NOT STOP MOTOR WHEN HANDLE IS RELEASED.
		SP8-5020

6

WARNING

8 1) BEFORE OPERATING THIS MACHINE, THOROUGHLY READ AND

COMPREHEND THE CONTENTS OF THE APPLICABLE OPERATOR'S MANUAL.

2)BEFORE STARTING THE POWER SOURCE, RAISE THE BLADE TO FULLY CLEAR THE WORK SURFACE. VISUALLY INSPECT THE BLADE/ARBOR SHAFT.

3)THIS MACHINE IS DESIGNED TO BE PULLED TOWARD THE OPERATOR DURING NORMAL OPERATION.

IMPROPER STARTING/OPERATION PROCEDURES CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY.

WARNING

KEEP CLEAR

OF ROTATING

PARTS

SP8-5030

7

SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #2 (05/28/09) — PAGE 58