Powermatic Troubleshooting Digital Scale Model 15S only, Switch Lock, Optional Accessories

Troubleshooting: Digital Scale – Model 15S only

Trouble	Probable Cause	Remedy
Flashing digits.	Low voltage.	Replace battery.
Locked digits.	Haphazard memory.	Take battery out, wait thirty seconds,
		then re-insert it.
No display.	Poor contact of battery.	Improve battery contact.
	Low voltage.	Replace battery.
Displays only ‘0000’.	Short-circuit of zero setting spring and	Remove frame and adjust spring.
	slider signal source.
Function buttons	Distortion of springs from over-	Remove frame and adjust springs.
won’t work.	pressing.

Switch Lock

To safeguard your machine from unauthorized operation and to avoid accidental starting by young children, the use of a padlock (not provided) is highly recommended.

To lock out an on/off switch (Figure 43):

1.Open the padlock.

2.Insert through holes in the start button.

3.Close the padlock.

4.Store padlock key in a safe place.

Figure 43

Optional Accessories

708816 Knives (set of 3) – Model 15S only

15S-600 Battery for digital scale – Model 15S only 15S-601 Battery cover – Model 15S only

1791212 Knife Inserts (set of 10) – Model 15HH only

708520 DRO Retrofit Kit

Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-274-6848, Monday through Friday (see our website for business hours, www.powermatic.com). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

26