Trouble Shooting Chart, Modelno | Craftsman 149.236321 instruction

TROUBLE SHOOTING CHART

TROUBLE

Woodstrikes outfeed

table after passing over cutterhead

Rippleson planed surface,

Planed surface not straight.

PROBABLECAUSE

t.Bladesimproperly adjusted below surfaceof outfeedtable,

2. Infeedtable out of adjustmenl

1.Onebladeset higher than other,

2.Dultblades.

3, Boardnot held firmly against fenceor outfeedtable

1. Infeedtable looseor out of adjustment.

REMEDY

1.Re-adjust blades,

2.Contactyour nearestSearsstore or service center.

1.Re-adjust blades

2.Re-sharpenor replace,

3.Hold board firmly against fenceand outfeedtable,

1, Adjust infeed table, see Maintenance section.

2, Bladesset too low,

Excessivegouging at end of cut. 1. Bladesset too high above outfeedtable,

90° and 45° cuts inaccurate	1.	Fenceandtilt indicators not adjusted
		properly,
Cutter guard does not	1,	Returnspring broken, or spring
function properly,		has beenweakened,
Chip discharge clogs	1.	Obstruction reducing air flow,.
	2.	Cutterheadspeed too slow.
	3.	Woodhas high moisture content.
Cutter slows down	1.	Work feed speed too fast.
during operation	2.	Attempting to removetoo much material
	2.	Attempting to removetoo much material

2.Re-adjust blades.

1.Resetblades.

1.Re-adjust fence, seeAssembly section.

1.Replacespring immediately. Contact

your nearestSears storeor service center.

1.Removeobstruction.

2.Decreasefeed speed.

3.Decreasefeed speed.

1.Decreasefeed speed.

2.Decreasedepth of cut, make two or more cuts,

SE/A,IRS

owners manual

Service

MODELNO.

149.236321

How To Order Repair Parts

SF_/A,IRS / I:RI:1FTSMI:IN®

5 l/s-INCHJOINTER-PLANER

Now that you have purchased your Jointer-Planer, should a need ever exist for repair parts or service, simply contact any Sears Service Center and most Sears, Roebuck and Co. stores. Be sure to provide all pertinent facts when you call or visit.

WHEN ORDERING REPAIR PARTS, ALWAYS		GIVE	THE FOLLOWING INFORMATION:
• PART NUMBER	•	PART	DESCRIPTION
• MODEL NUMBER:	•	NAME	OF ITEM: 5-118 INCH
149.236321		JOINTER--PLANER

All parts listed may be ordered from any Sears Service Center and most Sears dtores.

If the parts you need are not stocked locally, your order will be electronically transmitted to a Sears Repair Parts Distribution Center for handling.

SEARS, ROEBUCK AND CO., Dept. D/817WA, Hoffman Estates, IL 60195

Printed in U.S.A.