Entering Your Program, Set Current Time and Day

Use the table to plan your program time periods and the temperatures you want during each period. Fill in the complete table to have a record of your programs.

Entering Your Program

Set Current Time and Day

1. Press TIME button once. The display will show the hour only.

EXAMPLE:

2.Press and hold either or until you reach the correct hour and AM/PM designation (AM begins at midnight; PM begins at noon).

3.Press TIME once again. The display window will show the minutes only.

EXAMPLE:

4.Press and hold either or until you reach the correct minutes.

5.Press TIME once again. The display will show the day of the week.

6.Press or until you reach the current day of the week.

7.Press RUN once. The display will show the correct time and room temperature alternately.

6.Repeat steps 3 and 4 to select the start time and heating temperature for the 2nd heating program period.

7.Repeat steps 3 through 5 for the 3rd and 4th heating program periods.

8.Press PRGM once. “SA” (indicating Saturday program) will appear in the display, along with the start time for the 1st heating period and the currently programmed temperature.

9.Repeat steps 3 through 7 to complete Saturday heating programming.

9.Press PRGM once to change to SU (Sunday) heating programming and repeat steps 3 through 7 to complete Sunday programming.

11.When you have completed entering your heating program, press RUN.

Enter Cooling Program

▲! CAUTION

If the outside temperature is below 50°F, disconnect power to the cooling system before programming. Energizing the air conditioner compressor during cold weather may cause personal injury or property damage.

1.Move SYSTEM switch to COOL position.

2.Follow Enter Heating Program for entering your cooling program, using your selected cooling times and tempera- tures.

Enter Heating Program

1.Move the SYSTEM switch to HEAT.

2.Press PRGM once. “MO TU WE TH FR” (indicating weekday program) will appear in the display. Also displayed are the currently programmed start time for the 1st heating period and the currently programmed temperature (flashing).

MO TU WE TH FR

CHECK YOUR PROGRAMMING

Follow these steps to check your thermostat programming one final time before beginning thermostat operation.

1.	Move SYSTEM switch to HEAT position.
2.	Press PRGM to view the 1st weekday heating period time
	and temperature. Each time you press PRGM, the next
	heating period time and temperature will be displayed in

EXAMPLE:

sequence for weekday, then Saturday and Sunday program

periods (you may change any time or temperature during

this procedure).

This display window shows that for the 1st weekday period, the start time is 6:00 AM, and 68° is the programmed temperature (this example reflects factory preprogramming).

3.Press or to change the displayed temperature to your selected temperature for the 1st heating program period.

4.Press TIME once (the programmed time will flash). Press

or until your selected time appears. The time will change in 15 minute increments. When your selected time is displayed, press TIME again to return to the change temperature mode.

5.Press PRGM once. The currently programmed start time and setpoint temperature for the 2nd heating program period will appear.

3.	Press RUN.
4.	Move SYSTEM switch to COOL position.
5.	Repeat step 2 to check cooling program.
6.	Move SYSTEM switch to HEAT or COOL and press RUN to
	begin program operation.

NOTE: Batteries are not required to keep your programming or menu data. With two optional “AA” batteries installed, your thermostat will maintain time and continuously display the temperature during a loss of AC power. Installed batteries will also allow programming prior to installation.

YOUR THERMOSTAT IS NOW PROGRAMMED AND READY TO PROVIDE MAXIMUM COMFORT AND EFFICIENCY!

HOMEOWNER HELP LINE: 1-800-284-2925

White-Rodgers is a division of Emerson Electric Co.

www.white-rodgers.com

The Emerson logo is a trademark and a service mark of Emerson Electric Co.

1F82-261 specifications

The Emerson 1F82-261 and 1F89-211 are advanced programmable thermostats designed to enhance home comfort, energy efficiency, and convenience. These devices represent the latest in heating and cooling management technology, aiming to provide homeowners with intuitive control over their indoor climate.

One of the primary features of the Emerson 1F82-261 is its user-friendly interface. The large backlit display is easy to read, even in low light conditions. Users can quickly adjust settings, view the current temperature, and access programming options without hassle. Both models come equipped with a touch screen feature, allowing for simple navigation through menus and settings compared to older dial models.

The 1F82-261 model supports up to 2 heating and 1 cooling stages, making it suitable for multi-stage HVAC systems. It is ideal for those looking to optimize home heating or cooling while ensuring comfort. On the other hand, the 1F89-211 is designed for even greater versatility, offering compatibility with up to 2 stages of heating and 2 stages of cooling. This makes it an excellent choice for larger or more complex heating and cooling systems.

A highlight of both thermostats is their programmability. Users can set schedules for different days of the week through a simple programming interface. This feature allows homeowners to reduce energy consumption by adjusting the temperature based on occupancy patterns, ensuring that energy is not wasted while the house is empty.

Another significant technology incorporated into these models is the Smart Response feature. This intelligent technology enables the thermostat to learn the household's heating and cooling patterns, making adjustments ahead of time to reach the desired temperature right when it is needed. This not only enhances comfort but also contributes to energy savings.

Further emphasizing energy efficiency, the Emerson thermostats include an auto-changeover feature for seamless transition between heating and cooling modes, depending on the current temperature. This technology ensures that your home maintains a consistent, comfortable climate throughout varying conditions.

Both models also support Wi-Fi connectivity, allowing for remote access and control via smartphone apps. This feature provides the convenience of monitoring and adjusting home temperatures from anywhere, enabling homeowners to arrive at a perfectly comfortable home after a long day.

In summary, the Emerson 1F82-261 and 1F89-211 combine modern design with intelligent features, making them ideal choices for anyone looking to enhance their home’s comfort and energy efficiency. With easy-to-use interfaces, advanced programmability, and smart technologies, these thermostats provide reliable solutions for efficient climate control.