4.The planer/molder with a 230 volt plug should only be connected to an outlet having the same configuration as illustrated by the grounded outlet box in Figure 3. No adapter is available or should be used with the 230 volt plug.
Important: In all cases (115 or 230 volts), make certain the receptacle in question is properly grounded. If you are not sure, have a registered electrician check the receptacle.
Figure 2a | Figure 2b |
Figure 3
6.0On-Off Switch Padlock
To safeguard your machine from unauthorized operation and to avoid accidental starting by young children, the use of a padlock (not provided) is highly recommended.
To lock out an
1.Open the padlock.
2.Insert through holes in the start button.
3.Close the padlock.
4.Place the key in a safe location.
Figure 4
7