Inserting the memory card, Insert the memory card

3M 702 Inserting the memory card, Install a pull tab on the memory card, Insert the memory card

Page 14

Inserting the memory card

The memory card contains the data and Handheld software required for operation.

1 - Install a pull tab on the memory card

The handheld includes a number of pull tabs that you can attach to various memory cards. These pull tabs can make removing memory cards easier.

For reliable operation, 3M recommends using only SanDisk memory cards and SanDisk memory-card readers.

2 – Insert the memory card

1Grasp the memory card with the label side up.

2Push the pin-socket end of the memory card into the memory-card slot until it is completely inserted.

Messages (such as loading the database, etc.) appear on the screen.

If the memory card contains a newer version of 3M software, a dialog box will ask you if you want to install the new version.

Above the memory-card slot is a Secure Digital (SD) card slot that is not used. A small plastic panel blocks the SD slot. If the panel becomes loose, push it back into place.

Database Errors

The handheld may display No Database or Invalid Database messages.

These messages are usually the result of corrupted data on the memory card.

If you see these messages, you may have to reformat the memory card (See Formatting a memory card on page 13.)

Pin Socket

5-7890-8123-78

32MB	CompactFlash
5-7890-8123-78

Memory Card

Pull Tab

702_007

Figure 3: Attach the memory-card pull tab to the memory card.

Pin-socket side of

the memory card

Insert the memory card with:

> The pin-socket end of the memory card facing the Handheld

> The label facing up.

702_008

Figure 4: Insert the memory card as shown.

Image 14

Contents

Handheld Rfid Reader Model 702 and Model 3M Security Systems DivisionPage Table of Contents Page It has not been evaluated for other uses Safety InformationIntended Use Safety messages To reduce the risk associated with fire and explosionBe careful not to damage the handheld Do not over tighten the antenna adjustment screwImportant Notes Save all the original handheld packing materialsSafety label locations EMC Compliance Europe EMC, USA, and Canada ComplianceIndustry Canada Radio Frequency Rules and Regulations Specifications Getting StartedHandheld components Handheld componentsControls and indicators Handheld includes a menu-driven display screenCalibrate the screen Using the Handheld Device for the first timeSee Inserting the memory card on Inserting the memory card Install a pull tab on the memory cardDatabase Errors Insert the memory cardProcedure Removing the memory cardTo reset the handheld Resetting the handheldSymptoms may include If pressing the reset button did not work…Using Windows to format the memory card Formatting a memory cardStoring the handheld Adjusting the antennaCleaning the handheld Storing the handheld for less than a weekChecking the battery charge Battery ManagementBattery charging guidelines Low battery warning messagesConnect the power supply output to the charger stand Charging the batteryTo charge a battery RedReplacing the battery Battery replacementRequesting service 3M Service phone numbersOrdering replacement parts Stock Number Description