3M 802, 702 owner manual Formatting a memory card, Using Windows to format the memory card

Page 17

Formatting a memory card

If the Handheld displays database error messages when you insert the memory card, try reformatting the memory card.

If this procedure does not work, call 3M Service. (See Requesting service on page 18.)

No Database

No database found on

Memory card.

Insert a memory card with a Valid database.

OK

DLA_053

Invalid Database

Invalid database found on memory card.

Export data to memory card again.

OK

DLA_061

Using Windows to format the memory card

1Double-click the My Computer icon on your computer’s desktop.

2Right click on the memory-card icon and select Format.

The Format dialog box appears.

Leave the other settings at their default state.

3In the File System list box, select FAT.

4Click Start.

5After formatting is complete, use your system software to export information to the memory card.

6Insert the memory card into the Handheld.

If the Handheld reads the memory card, the formatting was successful.

If the Handheld displays “No Database” or “Invalid Database” messages, call 3M Service. See Requesting service on page 18 for phone numbers.

Figure 7: If the Handheld displays database error messages when you insert the memory card, try reformatting the memory card.

13

Image 17

Contents 3M Security Systems Division Handheld Rfid Reader Model 702 and ModelPage Table of Contents Page It has not been evaluated for other uses Safety InformationIntended Use To reduce the risk associated with fire and explosion Safety messagesImportant Notes Do not over tighten the antenna adjustment screwBe careful not to damage the handheld Save all the original handheld packing materialsSafety label locations EMC Compliance Europe EMC, USA, and Canada ComplianceIndustry Canada Radio Frequency Rules and Regulations Getting Started SpecificationsHandheld components Handheld componentsHandheld includes a menu-driven display screen Controls and indicatorsCalibrate the screen Using the Handheld Device for the first timeSee Inserting the memory card on Database Errors Install a pull tab on the memory cardInserting the memory card Insert the memory cardRemoving the memory card ProcedureSymptoms may include Resetting the handheldTo reset the handheld If pressing the reset button did not work…Formatting a memory card Using Windows to format the memory cardCleaning the handheld Adjusting the antennaStoring the handheld Storing the handheld for less than a weekBattery charging guidelines Battery ManagementChecking the battery charge Low battery warning messagesTo charge a battery Charging the batteryConnect the power supply output to the charger stand RedBattery replacement Replacing the battery3M Service phone numbers Requesting serviceStock Number Description Ordering replacement parts