3M 802, 702 owner manual Removing the memory card, Procedure

Page 15

Removing the memory card

IMPORTANT NOTE!

Always return to the Home screen before removing the memory card.

This helps avoid corrupting data that you collected with the handheld and saved to the memory card.

Procedure

1Press Home to return to the Home screen.

This ensures that the handheld finishes any write activities before you attempt to remove the memory card.

2Grasp the memory card and pull it straight out from the handheld.

To make it easier to remove a memory card, attach a memory- card pull tab to the memory card.

702_010

Figure 5: Return to the 3M software Home screen before removing the memory card from the handheld.

11

Image 15

Contents

3M Security Systems Division Handheld Rfid Reader Model 702 and ModelPage Table of Contents Page Safety Information Intended UseIt has not been evaluated for other uses To reduce the risk associated with fire and explosion Safety messagesSave all the original handheld packing materials Do not over tighten the antenna adjustment screwImportant Notes Be careful not to damage the handheldSafety label locations EMC, USA, and Canada Compliance Industry Canada Radio Frequency Rules and RegulationsEMC Compliance Europe Getting Started SpecificationsHandheld components Handheld componentsHandheld includes a menu-driven display screen Controls and indicatorsUsing the Handheld Device for the first time See Inserting the memory card onCalibrate the screen Insert the memory card Install a pull tab on the memory cardDatabase Errors Inserting the memory cardRemoving the memory card ProcedureIf pressing the reset button did not work… Resetting the handheldSymptoms may include To reset the handheldFormatting a memory card Using Windows to format the memory cardStoring the handheld for less than a week Adjusting the antennaCleaning the handheld Storing the handheldLow battery warning messages Battery ManagementBattery charging guidelines Checking the battery chargeRed Charging the batteryTo charge a battery Connect the power supply output to the charger standBattery replacement Replacing the battery3M Service phone numbers Requesting serviceStock Number Description Ordering replacement parts