Parkside PMGS 12 A1 manual Safety advice relating specifically to this device, DIN EN

Page 26

Safety advice relating specifically to this device, DIN EN 60745-2-3

Safety advice for all uses

General safety advice for grinding, sanding (with sandpaper), wire brushing, polishing and disc-cutting:

a)This electrical power tool is intended for use as a grinding, sanding, wire- brushing, and disc-cutting machine.

Observe all the safety advice, instructions, in- formation in figures and all other information you received with this device. If you do not observe the following advice it could lead to electric shock, fire and / or serious injury.

b)Normative statement / advice for this tool is not applicable.

c)Do not use any accessory not specifi- cally intended by the manufacturer for this electrical power tool. Although an accessory may fit on your electrical power tool, this does not on its own guarantee that it can be safely used.

d)The maximum permitted speed of an attachment must be at least as high as the maximum speed indicated for the electrical power tool. An accessory rotating faster than its permitted speed could disintegrate or fly off.

e)The external diameter and the thickness of the attachment must be compatible with the dimensions of your electrical power tool. Attachments that are not dimen- sionally compatible cannot be adequately guarded or controlled.

f)Grinding discs, flanges, grinding wheels or other accessories must fit exactly on to the spindle of your elec- trical power tool. Attachments that do not exactly fit on the spindle turn unevenly, vibrate severely and could lead to loss of control.

g)Do not use damaged attachments. Before every use check attachments such as grinding discs for loose frag-

ments and cracks, grinding wheels for cracks, deterioration or excessive wear and wire brushes for loose or broken wires. If the electrical power tool or attachment is dropped, inspect for damage or change the attachment for an undamaged one. When you have inspected and inserted the at- tachment, position yourself and by- standers away from the plane of the rotating attachment and run the device at maximum speed for one minute. Damaged attachments will usually break apart during this test.

h)Wear personal protective

equipment. Use a full face vi- sor, safety goggles or safety glasses, depending on the application. Wear a dust mask, hearing protectors, safety gloves or special apron capable

of stopping particles of the grinding medium or workpiece, as appropriate for the task. Eyes must be protected from the flying debris which can arise from some operations. Dust or breathing masks must be capable of filtering out the dust generated by the application. Prolonged exposure to loud noise can lead to hearing loss.

i)Keep bystanders at a safe distance from your work area. Anyone entering the work area must wear personal protective equipment. Fragments of the workpiece or of a broken attachment could fly off and cause injury beyond the immediate working area.

j)Hold the device by the insulated han- dle surfaces when you are undertak- ing work where there is the danger of the attachment striking hidden electricity cables or the device’s mains lead. Contact with a live wire could cause metal parts of the device to become live and lead to electric shock.

k)Keep the mains lead away from rotat- ing attachments. If you lose control of the device the mains lead may become severed or trapped and your hand or arm may be pulled into the rotating attachment.

4

GB/IE

Image 26
Contents Modelling and Engraving SET Pmgs 12 A1 GB / IE Page Table of contents Modelling and engraving set Pmgs 12 A1 Introduction Features and equipmentIntroduction Proper useIncluded items Technical informationElectrical safety General safety advice for electrical power toolsWorkplace safety Personal safetyCareful handling and use of electrical power tools Switching off Switching on and off Setting the speed rangeSwitching on / Setting the speed range Inserting or replacing a tool / colletMaintenance and cleaning Operation / Maintenance and cleaningAdvice on working with materials / Tools / Speed ranges Tips and tricksWarranty Service / Warranty / DisposalService DisposalManufacturer’s Declaration of Conformity / Manufacturer Manufacturer’s Declaration Conformity / ManufacturerPage Allgemeine Sicherheitshinweise für Elektrowerkzeuge InhaltsverzeichnisEinleitung InbetriebnahmeBestimmungsgemäßer Gebrauch EinleitungModellbau- und Gravierset Pmgs 12 A1 Einleitung AusstattungEN60745-2-3 LieferumfangTechnische Daten SchalldruckpegelElektrische Sicherheit Allgemeine Sicherheitshinweise für ElektrowerkzeugeArbeitsplatzsicherheit Sicherheit von PersonenVerwendung und Behandlung des Elektrowerkzeugs Stromversorgung anschließen, kann dies zu Unfällen führenTragen Sie eine Staubschutzmaske Werkzeug / Spannzange einsetzen / wechselnVermeiden Sie den Kontakt mit dem laufenden Schleifwerkzeug Einsatzwerkzeug mit Spanndorn 12 verwendenInbetriebnahme Ein- und ausschalten / Drehzahlbereich einstellenWartung und Reinigung Inbetriebnahme / Wartung und Reinigung / Service / GarantieTipps und Tricks GarantieKonformitätserklärung Hersteller Garantie / Entsorgung / Konformitätserklärung / HerstellerEntsorgung Kompernass Gmbh Modelling Engraving SET Safety advice relating specifically to this device Safety advice relating specifically to this device, DIN EN Safety advice for all usesSafety advice relating to kickback Special safety advice relating to grinding and disc-cuttingSpecial safety advice for polishing Further special safety advice for disc-cuttingSpecial safety advice for abrading using sandpaper Special safety advice for working with wire brushes Entfällt Gerätespezifische Sicherheitshinweise DIN ENSicherheitshinweise für alle Anwendungen Rückschlag und entsprechende Sicherheitshinweise Weitere besondere Sicherheits- hinweise zum Trennschleifen Besondere Sicherheitshinweise zum Arbeiten mit Drahtbürsten Besondere Sicherheitshinweise zum SandpapierschleifenBesondere Sicherheitshinweise zum Polieren Kompernass Gmbh

PMGS 12 A1 specifications

The Parkside PMGS 12 A1 is a versatile and efficient cordless angle grinder, specifically designed for both home improvement enthusiasts and professional users. This powerful tool is part of the Parkside range known for delivering quality and affordability, making it an excellent addition to any toolkit.

One of the standout features of the PMGS 12 A1 is its 12V lithium-ion battery system. This battery technology provides consistent performance and longevity, ensuring users can tackle a variety of tasks without interruption. The tool is lightweight, weighing in at just over 1.5 kilograms, which enhances maneuverability and reduces fatigue during extended use.

The angle grinder is equipped with a powerful motor that operates at a no-load speed of up to 19,500 RPM. This high RPM rate allows for efficient cutting, grinding, and polishing on various materials such as metal, stone, and even ceramics. Users will appreciate the tool's easy-to-use design, highlighted by its variable speed control feature that allows for optimal settings depending on the job at hand.

Safety is a key concern in power tools, and the PMGS 12 A1 incorporates several safety features. These include a protective cover that can be easily adjusted without tools, and a well-placed safety switch that prevents accidental activation. The ergonomic design of the tool allows for a comfortable grip, reducing strain during prolonged use.

Another notable aspect of the Parkside PMGS 12 A1 is its compatibility with a range of discs and attachments. Users can easily swap out grinding discs and cut-off wheels to suit their specific projects, enhancing the tool's versatility. This feature is especially beneficial for those who tackle various tasks around the home or on construction sites.

In conclusion, the Parkside PMGS 12 A1 stands out as a reliable, user-friendly cordless angle grinder. Its powerful motor, lightweight design, and safety features cater to both hobbyists and professionals. With its versatility in handling different materials and tasks, this tool represents an excellent balance of performance and practicality, making it a valuable asset for any DIY enthusiast or professional tradesperson.