Parkside PMGS 12 A1 manual Modelling and engraving set Pmgs 12 A1 Introduction, Proper use

Page 5

Introduction

The following pictograms are used in these operating instructions / on the device:

 

Read instruction manual!

Keep children away from electrical

 

power tools!

 

 

V~

Volt (AC)

Caution – electric shock!

Danger to life!

 

W

Watts (Effective power)

For indoor use only!

 

 

Direct current

Risk of loss of life by electric shock from

 

(Type of current and voltage)

damaged mains lead or mains plug!

n0

 

Wear hearing protection, dust

Design no-load speed

protection mask, protective glasses

 

 

 

and protective gloves.

mA

Milliamps / Amps / Amp-hours

Avoid contact with rapidly

A / Ah

rotating tools!

 

 

Safety class II

Risk of fire!

 

Observe caution and safety notes!

Proper procedure and handling.

 

Risk of explosion!!

Dispose packaging and appliance in

 

an environmentally-friendly way!

 

 

Modelling and engraving set PMGS 12 A1

Introduction

and sawing of wood, metal, plastic, ceramic or stone in dry rooms. Any other use or modification to the drill / grinder shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use. Not intended

 

Please make sure you familiarise yourself

for commercial use.

 

 

fully with the way the device works before

 

 

 

you use it for the first time and that you

 

Features and equipment

understand how to handle electrical power tools

 

correctly. To help you do this please read the accom-

 

 

panying operating instructions. Keep these instructions

Small drill:

in a safe place. If you pass the device on to anyone

1

ON / OFF switch / Rotational speed control

else, please ensure that you also pass on all the

2

Metal stirrup hanger

documentation.

3

Plug for mains adapter

 

 

4

Clamping nut

Proper use

5

Spigot nut

6

Spindle lock

The small drill is to be used for drilling, milling, en- graving, polishing, cleaning up, grinding, separating

6GB/IE

Image 5
Contents Modelling and Engraving SET Pmgs 12 A1 GB / IE Page Table of contents Introduction Features and equipmentModelling and engraving set Pmgs 12 A1 Introduction Proper useTechnical information Included itemsWorkplace safety General safety advice for electrical power toolsElectrical safety Personal safetyCareful handling and use of electrical power tools Switching on / Setting the speed range Switching on and off Setting the speed rangeSwitching off Inserting or replacing a tool / colletAdvice on working with materials / Tools / Speed ranges Operation / Maintenance and cleaningMaintenance and cleaning Tips and tricksService Service / Warranty / DisposalWarranty DisposalManufacturer’s Declaration Conformity / Manufacturer Manufacturer’s Declaration of Conformity / ManufacturerPage Einleitung InhaltsverzeichnisAllgemeine Sicherheitshinweise für Elektrowerkzeuge InbetriebnahmeModellbau- und Gravierset Pmgs 12 A1 Einleitung EinleitungBestimmungsgemäßer Gebrauch AusstattungTechnische Daten LieferumfangEN60745-2-3 SchalldruckpegelArbeitsplatzsicherheit Allgemeine Sicherheitshinweise für ElektrowerkzeugeElektrische Sicherheit Sicherheit von PersonenStromversorgung anschließen, kann dies zu Unfällen führen Verwendung und Behandlung des ElektrowerkzeugsVermeiden Sie den Kontakt mit dem laufenden Schleifwerkzeug Werkzeug / Spannzange einsetzen / wechselnTragen Sie eine Staubschutzmaske Einsatzwerkzeug mit Spanndorn 12 verwendenEin- und ausschalten / Drehzahlbereich einstellen InbetriebnahmeTipps und Tricks Inbetriebnahme / Wartung und Reinigung / Service / GarantieWartung und Reinigung GarantieKonformitätserklärung Hersteller Garantie / Entsorgung / Konformitätserklärung / HerstellerEntsorgung Kompernass Gmbh Modelling Engraving SET Safety advice relating specifically to this device Safety advice for all uses Safety advice relating specifically to this device, DIN ENSpecial safety advice relating to grinding and disc-cutting Safety advice relating to kickbackSpecial safety advice for polishing Further special safety advice for disc-cuttingSpecial safety advice for abrading using sandpaper Special safety advice for working with wire brushes Entfällt Gerätespezifische Sicherheitshinweise DIN ENSicherheitshinweise für alle Anwendungen Rückschlag und entsprechende Sicherheitshinweise Weitere besondere Sicherheits- hinweise zum Trennschleifen Besondere Sicherheitshinweise zum Arbeiten mit Drahtbürsten Besondere Sicherheitshinweise zum SandpapierschleifenBesondere Sicherheitshinweise zum Polieren Kompernass Gmbh

PMGS 12 A1 specifications

The Parkside PMGS 12 A1 is a versatile and efficient cordless angle grinder, specifically designed for both home improvement enthusiasts and professional users. This powerful tool is part of the Parkside range known for delivering quality and affordability, making it an excellent addition to any toolkit.

One of the standout features of the PMGS 12 A1 is its 12V lithium-ion battery system. This battery technology provides consistent performance and longevity, ensuring users can tackle a variety of tasks without interruption. The tool is lightweight, weighing in at just over 1.5 kilograms, which enhances maneuverability and reduces fatigue during extended use.

The angle grinder is equipped with a powerful motor that operates at a no-load speed of up to 19,500 RPM. This high RPM rate allows for efficient cutting, grinding, and polishing on various materials such as metal, stone, and even ceramics. Users will appreciate the tool's easy-to-use design, highlighted by its variable speed control feature that allows for optimal settings depending on the job at hand.

Safety is a key concern in power tools, and the PMGS 12 A1 incorporates several safety features. These include a protective cover that can be easily adjusted without tools, and a well-placed safety switch that prevents accidental activation. The ergonomic design of the tool allows for a comfortable grip, reducing strain during prolonged use.

Another notable aspect of the Parkside PMGS 12 A1 is its compatibility with a range of discs and attachments. Users can easily swap out grinding discs and cut-off wheels to suit their specific projects, enhancing the tool's versatility. This feature is especially beneficial for those who tackle various tasks around the home or on construction sites.

In conclusion, the Parkside PMGS 12 A1 stands out as a reliable, user-friendly cordless angle grinder. Its powerful motor, lightweight design, and safety features cater to both hobbyists and professionals. With its versatility in handling different materials and tasks, this tool represents an excellent balance of performance and practicality, making it a valuable asset for any DIY enthusiast or professional tradesperson.