Included items, Technical information | Parkside PMGS 12 A1 instruction

Introduction / General safety advice for electrical power tools

Mains adapter (see Fig. A):			Evaluated acceleration, typical:
7	Plug-in device for plug	3	Hand / arm vibration: 1.987 m / s2
	Tray		Uncertainty K = 1.5 m / s2
8	Tray		Uncertainty K = 1.5 m / s2

9Mains adapter

10	Power cable (with mains plug)			WARNING!	The vibration level given in these
			instructions has been measured in accordance with
Accessories (see Fig. B):			a standardised measurement procedure speciﬁed
11	6	HSS drills	in EN 60745 and can be used to compare devices.
12	2	Mandrels for mounting tools	Diﬀerent uses of the device give rise to diﬀerent
13	3	Polishing wheels	vibration levels and in many cases they may exceed
14	4	Grinding wheels	the values given in these instructions. It is easy to
15	1	Metal brush	underestimate the vibration load if the electrical pow-
16	1	Saw blade	er tool is used regularly in particular circumstances.

1710 Cutting wheels

18	5	Collets	Note: If you wish to make an accurate assessment
		Plastic brushes	of the vibration loads experienced during a particular
19	2	Plastic brushes	of the vibration loads experienced during a particular
20	3	Milling bits	period of working, you should also take into account
21	2	Engraving bits	the intervening periods of time when the device is
22	5	Grinding bits	switched oﬀ or is running but is not actually in use.
23	Combination tool		This can result in a much lower vibration load over
			the whole of the period of working.

Included items

1Small drill

1Mains adapter

1Plastic case

1Accessory kit (45-piece)

1Operating instructions

Technical information

Small drill PMGS 12 A1:

Nominal voltage:	12 V

Nominal output:	22 W
Idle-running speed:	n0 5000 - 20000 min-1
Max. drill bit diameter:	3.2 mm
Certiﬁed acc. to:	EN60745-1; EN60745-2-1

Noise and vibration data:

Measured values for noise are determined in accor- dance with EN 60745. The A-weighted noise level of the electrical power tool are typically:

Sound pressure level:	59.43 dB(A)
Sound power level:	70.43 dB(A)
Uncertainty K:	3 dB

Mains adapter PMGS 12 A1-1:

INPUT:

Rated voltage: 230 V ~ 50 Hz

OUTPUT:

Nominal voltage: 12 V

Nominal current: 1 A

Protection class: II /

Certiﬁed acc. to: EN61558

General safety advice for electrical power tools

WARNING! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, ﬁre and / or serious injury.

Keep all the safety advice and instructions in a safe place for future reference!

The term “electrical tool” used in the safety advice refers to electrical tools powered by mains electricity

GB/IE 7

PMGS 12 A1 specifications

The Parkside PMGS 12 A1 is a versatile and efficient cordless angle grinder, specifically designed for both home improvement enthusiasts and professional users. This powerful tool is part of the Parkside range known for delivering quality and affordability, making it an excellent addition to any toolkit.

One of the standout features of the PMGS 12 A1 is its 12V lithium-ion battery system. This battery technology provides consistent performance and longevity, ensuring users can tackle a variety of tasks without interruption. The tool is lightweight, weighing in at just over 1.5 kilograms, which enhances maneuverability and reduces fatigue during extended use.

The angle grinder is equipped with a powerful motor that operates at a no-load speed of up to 19,500 RPM. This high RPM rate allows for efficient cutting, grinding, and polishing on various materials such as metal, stone, and even ceramics. Users will appreciate the tool's easy-to-use design, highlighted by its variable speed control feature that allows for optimal settings depending on the job at hand.

Safety is a key concern in power tools, and the PMGS 12 A1 incorporates several safety features. These include a protective cover that can be easily adjusted without tools, and a well-placed safety switch that prevents accidental activation. The ergonomic design of the tool allows for a comfortable grip, reducing strain during prolonged use.

Another notable aspect of the Parkside PMGS 12 A1 is its compatibility with a range of discs and attachments. Users can easily swap out grinding discs and cut-off wheels to suit their specific projects, enhancing the tool's versatility. This feature is especially beneficial for those who tackle various tasks around the home or on construction sites.

In conclusion, the Parkside PMGS 12 A1 stands out as a reliable, user-friendly cordless angle grinder. Its powerful motor, lightweight design, and safety features cater to both hobbyists and professionals. With its versatility in handling different materials and tasks, this tool represents an excellent balance of performance and practicality, making it a valuable asset for any DIY enthusiast or professional tradesperson.