FEATURES
KNOW YOUR ROTARY TOOL KIT
See Figure 1.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
CLEANING BRUSH
Use the cleaning brush to quickly clean the workpiece, rotary tool, and accessories.
DIGITAL DISPLAY
The speed of the tool is conveniently shown on the digital display.
FLEX SHAFT
A flexible shaft can be connected to the rotary tool for working in hard to reach areas and for better control during delicate work.
PLUNGE CUTTING ACCESSORY
The plunge cutting accessory attaches to the end of the rotary tool. Depth of cut can be adjusted in 1/8 in. increments up to 1 in.
SPEED CONTROL BUTTONS
The speed control buttons allow you to easily select tool speed.
TELESCOPING TOOL HANGER
The telescoping tool hanger provides a convenient place to hang the rotary tool while the flex shaft is in use.
ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
PACKING LIST
Rotary Tool
Accessories (See Accessory Chart)
Case
Locking Key
Wrench
Cleaning Brush
Plunge Cutting Accessory
Collet (4)
Telescoping Tool Hanger
Flex Shaft
Tool Hanger
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.
9