Page 1
Introduction
Warning
To avoid shock or injury, do not perform the verification tests or calibration procedures
described in this manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
Caution
The
Follow the standard practices for handling static sensitive devices.
For additional information about IDEAL INDUSTRIES, INC. and it’s products,
and services, visit IDEAL INDUSTRIES, INC. web site at:
www.idealindustries.com
Precautions and Safety Information
Use the meter only as described in the Users Manual. If you do not do so, the protection provided by the meter may be impaired. Read the “Safety Information” page before servicing this product. In this manual, a Warning identifies conditions and actions that pose hazard(s) to the user; a Caution identifies conditions and actions that may damage the meter or the test instruments.
The Symbols
The symbols used on the meter and in this manual are explained in Table A.
Table A. The Symbols
Symbol | Meaning | Symbol | Meaning |
|
|
|
|
| Alternating signal |
| Battery |
|
|
|
|
| Direct signal |
| Earth ground |
|
|
|
|
CAT III | IEC overvoltage Category III |
| Double insulated |
|
|
|
|
| Refer to the manual. Important |
| Take appropriate precautions. |
|
| Hazardous voltage may be | |
| information. |
| |
|
| present | |
|
|
| |
|
|
|
|
Form number TM61095 | Rev 2 September 2002 |