Makita HR2611F instruction manual Optional Accessories, Maintenance, Diamond core drilling

Page 11

Diamond core drilling

When performing diamond core drilling operations, always set the change lever to the position to use "rotation only" action.

CAUTION:

If performing diamond core drilling operations using "rotation with hammering" action, the diamond core bit may be damaged.

Operation when using the dust cup (accessory)

OPTIONAL ACCESSORIES

CAUTION:

These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.

If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.

1

1. Dust cap

SDS-Plus Carbide-tipped bits

Core bit

Bull point

Diamond core bit

Cold chisel

Scaling chisel

Grooving chisel

Drill chuck assembly

Drill chuck S13

010736

Operate the tool with the dust cup against the ceiling surface.

NOTE:

The dust cup (accessory) is intended only for drilling in the ceramic workpiece such as concrete and mortar. Do not use the tool with the dust cup when drilling in metal or similar. Using the dust cup for drilling in the metal may damage the dust cup due to the heat produced by small metal dust or similar.

Empty the dust cup before removing a drill bit.

When using the dust cup, make sure that the dust cap is mounted on it securely.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.

Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and replacement, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.

Chuck adapter

Chuck key S13

Bit grease

Side grip

Depth gauge

Blow-out bulb

Dust cup

Dust extractor attachment

Safety goggles

Plastic carrying case

Keyless drill chuck

NOTE:

Some items in the list may be included in the tool package as standard accessories. They may differ from country to country.

11

Image 11
Contents Rotary Hammer Combination Hammer English Original instructions SpecificationsSymbols Power supplyCould result in a hazardous situation Rotary Hammer Safety WarningsLighting up the lamps Switch actionFunctional Description Changing the quick change chuck for SDS-plus Reversing switch actionSelecting the action mode Bit grease AssemblyTorque limiter Side grip auxiliary handleDepth gauge Installing or removing the bitBit angle when chipping, scaling or demolishing Action mode changing knobDust cup Installing or removing the dust cupSymbol Dust cupHammer drilling operation Blow-out bulb optional accessoryOperation HR2611F Chipping/Scaling/DemolitionDrilling in wood or metal For Models HR2300, HR2600, HR2601, HR2610Diamond core drilling Optional AccessoriesMaintenance Operation when using the dust cup accessoryMakita Corporation