5.Under normal operation, the tool is designed to produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation.
6.In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. This will loosen up the lubrica- tion. Without proper
7.Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations.
8.Hold the tool firmly with both hands.
9.Keep hands away from moving parts.
10.Do not leave the tool running. Operate the tool only when
11.Do not point the tool at any one in the area when operating. The bit could fly out and injure someone seriously.
12.Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin.
13.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow mate- rial supplier safety data.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
5