Stanley Black & Decker MB05 user manual Daily Maintenance Checks, Tool Stop and Lower Bushing

Page 16

MAINTENANCE

DAILY MAINTENANCE CHECKS

Check for loose or missing fasteners. Tighten or replace as needed.

Inspect tool retaining pins and pockets for wear.

Check for hydraulic leaks at all fittings and hoses. Re- place any defective hoses.

Apply grease to the grease fitting in the lower body each morning. Grease as needed throughout the work day.

TOOL STOP AND LOWER BUSHING

Inspect the tool stop and lower bushing for excessive galling and metal pickup on the tool bit. Also check for cracks. If cracks are present, the part must be replaced.

The extent of wear of the tool stop and lower bushings and the tool bit can be checked by moving a NEW tool bit back and forth and measuring the gap between the tool bit and the lower bushing. If the gap is more than

.250 in./6 mm, the upper bushing, lower bushing and tool bit should be replaced. A gap in excess of .250 in./6

mmwill cause damage to the piston. Do not just replace the tool bit or the lower bushing individually as this will result in premature wear of the replaced component. It is recommended to replace ALL worn components.

16 ► MB05 User Manual

18 inches

1/4 in. max.

Move the tool bit back and forth and measure the gap between tool bit and lower bushing. (Use a new tool bit.)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents MB05 Declaration of Conformity Weisbeck, AndyTable of Contents Safety Symbols Local Safety RegulationsSafety Precautions Be Thoroughly Trained Before Operating the Unit Alone Obey Safety RulesKnow the Work Conditions Safety Precautions MB05 Tool Stickers & TagsPRE-OPERATION Procedures PRE-INSTALLATION InstructionsOperation Long Term Storage LOW Temperature WARM-UP ProcedureSecuring the Tool BIT Operating the Breaker Preparation for USEPositioning the Carrier Backhoes ExcavatorsMaintain Down Pressure BreakingBlank Firing Breaker tool bit bindingUnderwater Usage Grease the BITTroubleshooting Problem Cause SolutionDaily Maintenance Checks MaintenanceTool Stop and Lower Bushing When disengaging the tester a POP of nitrogen is normal Charging the AccumulatorWear Tolerances NEW Reject LimitTool Failure not Covered Under Warranty WORN-OUT Front Bushings or Retainer PinsProper Care of Tool Bits Blank Firing or Free RunningMushrooming CorrosionPrying Tool Failure Covered Under Warranty Internal Material FlawChisel MoilBlunt Flow Test Procedures Test ProcedureTroubleshooting Heat Load TestDefinition of Terms ToolSpecifications Torque TableAccessories Service ToolsDescription Tool Bits MiscellaneousMB05 Power Cell Illustration MB05 Power Cell Parts List QTY DescriptionMB05 Housing Parts 70766 MB05E04MB05 Skid Steer Mounting Brkt MB05S04 C&P027 TOP Skid Steer MB05S05 Skid Steer Xchange TOP 70768 MB05E05

MB05 specifications

The Stanley Black & Decker MB05 is a powerful and versatile tool that caters to the needs of professionals and DIY enthusiasts alike. Designed for robust performance, this model exemplifies the company’s commitment to innovation and quality.

One of the main features of the MB05 is its sturdy construction, ensuring durability even in the most demanding work environments. The design incorporates high-quality materials that withstand heavy use, making it ideal for both industrial and residential applications. The ergonomic handle enhances comfort during prolonged use, reducing fatigue and improving user experience.

In terms of technology, the MB05 boasts a powerful motor capable of delivering high torque while maintaining efficiency. This motor enables the tool to handle a variety of tasks, from light-duty jobs to more intensive applications. Additionally, the MB05 is equipped with an advanced battery management system that provides excellent runtime and reduces charging time. The inclusion of lithium-ion battery technology further enhances performance by offering longer-lasting power and less downtime.

The MB05 features a versatile speed control mechanism, allowing users to adjust the tool's velocity according to the task at hand. This adaptability is particularly beneficial for users working on various materials, ensuring precise results every time. Moreover, the built-in LED light illuminates the work area, providing increased visibility in dimly lit spaces.

Another characteristic worth noting is the tool’s compatibility with a wide range of accessories. This versatility allows users to customize their experience and tackle diverse projects, from drilling to fastening. The quick-release chuck mechanism simplifies the process of changing accessories, saving valuable time and effort.

In summary, the Stanley Black & Decker MB05 is a robust and efficient tool designed for both professional and personal use. With its durable construction, powerful motor, advanced battery technology, adjustable speed control, and compatibility with various accessories, it represents a valuable addition to any toolbox. Users can rely on the MB05 to deliver exceptional performance and meet their diverse project needs effectively. With Stanley Black & Decker’s reputation for quality, the MB05 is an investment that promises reliability and satisfaction across various applications.
Top Page Image Contents