Stanley Black & Decker MB05 user manual Corrosion, Mushrooming, Prying

Page 20

PROPER CARE OF TOOL BITS

In its most extreme forms, the combination of surface damage and severe bending can quickly break even the best working steels.

The illustrations below show examples of severe stress breaks.

 

 

CORROSION

 

 

Tools should be greased and stored out of the weather.

 

 

Corrosion tends to accelerate the fatigue fractures of the

 

 

tool.

 

 

MUSHROOMING

PRYING

 

Driving the tool into a hard material for a long period of

This is the most common cause of tool failure. Even

 

time generates an intense heat, indicated by a blue tone

when there is no surface damage, the stress from pry-

 

just above the point. This will soften the steel and cause

ing can easily break a working steel. This kind of failure

 

the point to fold over or mushroom the end of the tool.

generally results from any type of side pressure such as

 

Avoid hammering in one location for too long. If material

an incorrect breaking angle or from using the tool to re-

 

does not break after a short period (approximately 15 to

position material. The tool should not be used as a pivot

 

20 seconds), reposition the tool.

point when repositioning the carrier. The power gener-

 

 

ated by the carrier will far exceed the strength of the tool.

 

 

 

 

 

Similar failures can also occur when the steel is used with extreme down pressure, and the steel repeatedly slips off the work at an angle, or the material, itself moves from under the working steel.

As the next illustration shows, fatigue failures take many forms, but they all exhibit similar features. Generally, the broken surface is brittle and has a “lip” like that in the bending failure, even though, in some cases, the lip has been broken.

If the overheated steel is suddenly cooled by being dipped in standing water, for example, the metal will harden and become brittle. These are some examples of failure caused by temper changes occurring on the job.

20 ► MB05 User Manual

Page 19 Page 21
Image 20
Page 19 Page 21
Contents MB05 Declaration of Conformity Weisbeck, AndyTable of Contents Safety Symbols Local Safety RegulationsSafety Precautions Know the Work Conditions Obey Safety RulesBe Thoroughly Trained Before Operating the Unit Alone Safety Precautions MB05 Tool Stickers & TagsOperation PRE-INSTALLATION InstructionsPRE-OPERATION Procedures Securing the Tool BIT LOW Temperature WARM-UP ProcedureLong Term Storage Operating the Breaker Preparation for USEPositioning the Carrier Backhoes ExcavatorsMaintain Down Pressure BreakingBlank Firing Breaker tool bit bindingUnderwater Usage Grease the BITTroubleshooting Problem Cause SolutionTool Stop and Lower Bushing MaintenanceDaily Maintenance Checks When disengaging the tester a POP of nitrogen is normal Charging the AccumulatorWear Tolerances NEW Reject LimitTool Failure not Covered Under Warranty WORN-OUT Front Bushings or Retainer PinsProper Care of Tool Bits Blank Firing or Free RunningPrying CorrosionMushrooming Tool Failure Covered Under Warranty Internal Material FlawBlunt MoilChisel Flow Test Procedures Test ProcedureTroubleshooting Heat Load TestDefinition of Terms ToolSpecifications Torque TableAccessories Service ToolsDescription Tool Bits MiscellaneousMB05 Power Cell Illustration MB05 Power Cell Parts List QTY DescriptionMB05 Housing Parts 70766 MB05E04MB05 Skid Steer Mounting Brkt MB05S04 C&P027 TOP Skid Steer MB05S05 Skid Steer Xchange TOP 70768 MB05E05

MB05 specifications

The Stanley Black & Decker MB05 is a powerful and versatile tool that caters to the needs of professionals and DIY enthusiasts alike. Designed for robust performance, this model exemplifies the company’s commitment to innovation and quality.

One of the main features of the MB05 is its sturdy construction, ensuring durability even in the most demanding work environments. The design incorporates high-quality materials that withstand heavy use, making it ideal for both industrial and residential applications. The ergonomic handle enhances comfort during prolonged use, reducing fatigue and improving user experience.

In terms of technology, the MB05 boasts a powerful motor capable of delivering high torque while maintaining efficiency. This motor enables the tool to handle a variety of tasks, from light-duty jobs to more intensive applications. Additionally, the MB05 is equipped with an advanced battery management system that provides excellent runtime and reduces charging time. The inclusion of lithium-ion battery technology further enhances performance by offering longer-lasting power and less downtime.

The MB05 features a versatile speed control mechanism, allowing users to adjust the tool's velocity according to the task at hand. This adaptability is particularly beneficial for users working on various materials, ensuring precise results every time. Moreover, the built-in LED light illuminates the work area, providing increased visibility in dimly lit spaces.

Another characteristic worth noting is the tool’s compatibility with a wide range of accessories. This versatility allows users to customize their experience and tackle diverse projects, from drilling to fastening. The quick-release chuck mechanism simplifies the process of changing accessories, saving valuable time and effort.

In summary, the Stanley Black & Decker MB05 is a robust and efficient tool designed for both professional and personal use. With its durable construction, powerful motor, advanced battery technology, adjustable speed control, and compatibility with various accessories, it represents a valuable addition to any toolbox. Users can rely on the MB05 to deliver exceptional performance and meet their diverse project needs effectively. With Stanley Black & Decker’s reputation for quality, the MB05 is an investment that promises reliability and satisfaction across various applications.
Top Page Image Contents