Stanley Black & Decker MB05 user manual Be Thoroughly Trained Before Operating the Unit Alone

Page 6

SAFETY PRECAUTIONS

Tool operators and maintenance personnel must always comply with the safety pre- cautions given in this manual and on the stickers and tags attached to the tool and hose.

These safety precautions are given for your safety. Review them carefully before oper- ating the tool and before performing general maintenance or repairs.

Supervising personnel should develop additional precautions relating to the specific work area and local safety regulations. If so, place the added precautions in the space provided in this manual.

The MB05 Mounted Hydraulic Breaker will provide safe and dependable service if op- erated in accordance with the instructions given in this manual. Read and understand this manual and any stickers and tags attached to the tool and hoses before operation. Failure to do so could result in personal injury or equipment damage.

Check the rules and regulations at your location. The rules might include an employer's work safety program. Regulations may identify hazards such as working around utility supply lines or hazardous slopes.

BE THOROUGHLY TRAINED BEFORE OPERATING THE UNIT ALONE

•Operator training must start in an area without bystanders and use all the controls until he/she can control the machine fully under the conditions of the work area.

•When learning to operate a machine, do so at a slow pace.

KNOW THE WORK CONDITIONS

•The operator must know any prohibited uses or work areas for the machine. For example, excessive slopes and poor or dangerous terrain conditions must be avoided.

OBEY SAFETY RULES

•Operate the breaker in accordance with all laws and regulations which affect you, your equipment, and the worksite.

•Do not operate the breaker until you have read this manual and thoroughly understand all safety, operation and maintenance instructions.

•The operator must be familiar with all prohibited work areas such as excessive slopes and dangerous terrain conditions.

•Do not operate the breaker until you have read the carrier equipment manual and thoroughly understand all safety, operation and maintenance instructions. The word “carrier”, as used in this manual, means a backhoe or excavator or similar equipment used to operate the breaker.

•Ensure that all maintenance procedures recommended in this manual are completed before using the equip- ment.

•The operator must not operate the breaker or carrier if any people are within the area where they may be injured by flying debris or movement of the equipment.

•Know the limits of your equipment.

•Establish a training program for all operators to ensure safe operation.

•Warning: Use of this tool on certain materials during demolition could generate dust potentially containing a variety of hazardous substances such as asbestos, silica or lead. Inhalation of dust containing these or other hazardous substances could result in serious injury, cancer or death. Protect yourself and those around you. Research and understand the materials you are cutting. Follow correct safety procedures and comply with all applicable national, state or provisional health and safety regulations relating to them, including, if appropriate arranging for the safe disposal of the materials by a qualified person.

6 ► MB05 User Manual

Page 5 Page 7
Image 6
Page 5 Page 7
Contents MB05 Declaration of Conformity Weisbeck, AndyTable of Contents Safety Symbols Local Safety RegulationsSafety Precautions Obey Safety Rules Be Thoroughly Trained Before Operating the Unit AloneKnow the Work Conditions Safety Precautions MB05 Tool Stickers & TagsPRE-INSTALLATION Instructions PRE-OPERATION ProceduresOperation LOW Temperature WARM-UP Procedure Long Term StorageSecuring the Tool BIT Positioning the Carrier Backhoes Operating the BreakerPreparation for USE ExcavatorsMaintain Down Pressure BreakingBlank Firing Breaker tool bit bindingUnderwater Usage Grease the BITTroubleshooting Problem Cause SolutionMaintenance Daily Maintenance ChecksTool Stop and Lower Bushing When disengaging the tester a POP of nitrogen is normal Charging the AccumulatorWear Tolerances NEW Reject LimitProper Care of Tool Bits Tool Failure not Covered Under WarrantyWORN-OUT Front Bushings or Retainer Pins Blank Firing or Free RunningCorrosion MushroomingPrying Tool Failure Covered Under Warranty Internal Material FlawMoil ChiselBlunt Flow Test Procedures Test ProcedureTroubleshooting Heat Load TestDefinition of Terms ToolSpecifications Torque TableDescription Tool Bits AccessoriesService Tools MiscellaneousMB05 Power Cell Illustration MB05 Power Cell Parts List QTY DescriptionMB05 Housing Parts 70766 MB05E04MB05 Skid Steer Mounting Brkt MB05S04 C&P027 TOP Skid Steer MB05S05 Skid Steer Xchange TOP 70768 MB05E05

MB05 specifications

The Stanley Black & Decker MB05 is a powerful and versatile tool that caters to the needs of professionals and DIY enthusiasts alike. Designed for robust performance, this model exemplifies the company’s commitment to innovation and quality.

One of the main features of the MB05 is its sturdy construction, ensuring durability even in the most demanding work environments. The design incorporates high-quality materials that withstand heavy use, making it ideal for both industrial and residential applications. The ergonomic handle enhances comfort during prolonged use, reducing fatigue and improving user experience.

In terms of technology, the MB05 boasts a powerful motor capable of delivering high torque while maintaining efficiency. This motor enables the tool to handle a variety of tasks, from light-duty jobs to more intensive applications. Additionally, the MB05 is equipped with an advanced battery management system that provides excellent runtime and reduces charging time. The inclusion of lithium-ion battery technology further enhances performance by offering longer-lasting power and less downtime.

The MB05 features a versatile speed control mechanism, allowing users to adjust the tool's velocity according to the task at hand. This adaptability is particularly beneficial for users working on various materials, ensuring precise results every time. Moreover, the built-in LED light illuminates the work area, providing increased visibility in dimly lit spaces.

Another characteristic worth noting is the tool’s compatibility with a wide range of accessories. This versatility allows users to customize their experience and tackle diverse projects, from drilling to fastening. The quick-release chuck mechanism simplifies the process of changing accessories, saving valuable time and effort.

In summary, the Stanley Black & Decker MB05 is a robust and efficient tool designed for both professional and personal use. With its durable construction, powerful motor, advanced battery technology, adjustable speed control, and compatibility with various accessories, it represents a valuable addition to any toolbox. Users can rely on the MB05 to deliver exceptional performance and meet their diverse project needs effectively. With Stanley Black & Decker’s reputation for quality, the MB05 is an investment that promises reliability and satisfaction across various applications.
Top Page Image Contents