Stanley Black & Decker MB05 user manual LOW Temperature WARM-UP Procedure, Long Term Storage

Page 10

OPERATION

WARNING

Greasing the tool bit without down pressure on the breaker results in grease filling the space between the piston and the tool bit. When the breaker is next activated, the piston will strike the grease at a speed which will pressurize the grease resulting in seal and

grease zerk failure.

Piston in Down Position

Against Tool Bit

WARNING

Always wear eye protection when installing or

removing the tool retaining pin.

LOW TEMPERATURE WARM-UP

PROCEDURE

1.

After starting the carrier, warm-up the hydraulic sys-

 

tem at engine idle until hydraulic lines are warm to

 

the touch.

2.

With the carrier at idle and the breaker suspended

 

in the air or with minimal down pressure, turn on the

Grease Will Fill

This Space

Tool Stop

Lower Bushing

Tool Bit

Piston not against Tool Bit leaving space between the Piston and Bit.

Tool Stop

breaker to gradually warm up its internal compo-

nents.

3. When the hydraulic system and breaker are warm,

proceed with operation.

LONG TERM STORAGE

1.

Remove the tool bit, clean the tool stop and the low-

 

er bushing. Thoroughly coat the surfaces of the tool

 

stop and the lower bushing with grease.

2.

If hoses are attached to the breaker, install plugs

 

on the hose ends. If hoses are removed from the

 

breaker, install plugs on the hose ends and install

 

plugs in the breaker IN and OUT ports.

Lower Bushing

Tool Bit

3. Store the breaker in a vertical position. Do not store

the breaker horizontally for extended periods.

SECURING THE TOOL BIT

1.The tool retainer is shipped installed in the breaker.

2.Remove the stop pin and plug.

3.Drive out the tool retainer.

4.Grease the top area of the tool bit as shown in the illustration on page 9.

5.Install the tool bit making sure the notch is aligned with the lower body retainer pin holes.

6.Install the tool retainers.

10 ► MB05 User Manual

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MB05 Declaration of Conformity Weisbeck, AndyTable of Contents Safety Symbols Local Safety RegulationsSafety Precautions Be Thoroughly Trained Before Operating the Unit Alone Obey Safety RulesKnow the Work Conditions Safety Precautions MB05 Tool Stickers & TagsPRE-OPERATION Procedures PRE-INSTALLATION InstructionsOperation Long Term Storage LOW Temperature WARM-UP ProcedureSecuring the Tool BIT Positioning the Carrier Backhoes Operating the BreakerPreparation for USE ExcavatorsMaintain Down Pressure BreakingBlank Firing Breaker tool bit bindingUnderwater Usage Grease the BITTroubleshooting Problem Cause SolutionDaily Maintenance Checks MaintenanceTool Stop and Lower Bushing When disengaging the tester a POP of nitrogen is normal Charging the AccumulatorWear Tolerances NEW Reject LimitProper Care of Tool Bits Tool Failure not Covered Under WarrantyWORN-OUT Front Bushings or Retainer Pins Blank Firing or Free RunningMushrooming CorrosionPrying Tool Failure Covered Under Warranty Internal Material FlawChisel MoilBlunt Flow Test Procedures Test ProcedureTroubleshooting Heat Load TestDefinition of Terms ToolSpecifications Torque TableDescription Tool Bits AccessoriesService Tools MiscellaneousMB05 Power Cell Illustration MB05 Power Cell Parts List QTY DescriptionMB05 Housing Parts 70766 MB05E04MB05 Skid Steer Mounting Brkt MB05S04 C&P027 TOP Skid Steer MB05S05 Skid Steer Xchange TOP 70768 MB05E05

MB05 specifications

The Stanley Black & Decker MB05 is a powerful and versatile tool that caters to the needs of professionals and DIY enthusiasts alike. Designed for robust performance, this model exemplifies the company’s commitment to innovation and quality.

One of the main features of the MB05 is its sturdy construction, ensuring durability even in the most demanding work environments. The design incorporates high-quality materials that withstand heavy use, making it ideal for both industrial and residential applications. The ergonomic handle enhances comfort during prolonged use, reducing fatigue and improving user experience.

In terms of technology, the MB05 boasts a powerful motor capable of delivering high torque while maintaining efficiency. This motor enables the tool to handle a variety of tasks, from light-duty jobs to more intensive applications. Additionally, the MB05 is equipped with an advanced battery management system that provides excellent runtime and reduces charging time. The inclusion of lithium-ion battery technology further enhances performance by offering longer-lasting power and less downtime.

The MB05 features a versatile speed control mechanism, allowing users to adjust the tool's velocity according to the task at hand. This adaptability is particularly beneficial for users working on various materials, ensuring precise results every time. Moreover, the built-in LED light illuminates the work area, providing increased visibility in dimly lit spaces.

Another characteristic worth noting is the tool’s compatibility with a wide range of accessories. This versatility allows users to customize their experience and tackle diverse projects, from drilling to fastening. The quick-release chuck mechanism simplifies the process of changing accessories, saving valuable time and effort.

In summary, the Stanley Black & Decker MB05 is a robust and efficient tool designed for both professional and personal use. With its durable construction, powerful motor, advanced battery technology, adjustable speed control, and compatibility with various accessories, it represents a valuable addition to any toolbox. Users can rely on the MB05 to deliver exceptional performance and meet their diverse project needs effectively. With Stanley Black & Decker’s reputation for quality, the MB05 is an investment that promises reliability and satisfaction across various applications.
Top Page Image Contents