Miller Electric RGC, MOG-300, MOG-350, MOG-250, MOG-Pak Weld Input/Output Cables For Multi-Grid Rack

Y Turn Off welding power source, and disconnect input

1

Weld Input Cable

2

Work Cable

power before making any weld output connections.

3

Weld Output Cable

If necessary, use Section 3-7 to

select proper cable size.

Use shortest cables possible.

Do not use damaged cables.

4

Terminal Lug

Use lugs of proper amperage ca-

pacity and hole size for connecting

to common work, electrode hold-

er(s), and weld output terminals (if

applicable).

5

Common Work Connection

Connect work cable to common

work according to codes.

6

Input Terminal

For models with polarity reversing,

connect positive and negative

6

cables to matching input terminal.

For models without polarity revers-

ing, only one input terminal is pro-

vided. Connect electrode cable to

input terminal.

7

Insulated Electrode Holder

8

GTAW Torch

4

Install according to manufacturer’s

instructions.

9

Male Camlok Connector

Install onto weld output cable as

shown in Section 3-6.

10

Electrode Receptacle

Connect electrode holder cable to

Electrode receptacle.