Tool Stickers & Tags, N G E R | Stanley Black & Decker BR87 specification

TOOL STICKERS & TAGS

	11207
	Circuit Type C Decal
28409		11208
Composite Decal		11208
Composite Decal		Hex Shank Decal
		Hex Shank Decal
28322	72786	10180
CE Decal	Guarnteed Sound Power	Caution Decal
	Level Decal
		D A N G E R
	1.	FAILURE TO USE HYDRAULIC HOSE LABELED AND CER-
		TIFIED AS NON-CONDUCTIVE WHEN USING HYDRAULIC
		TOOLS ON OR NEAR ELECTRICAL LINES MAY RESULT IN
		DEATH OR SERIOUS INJURY.
		BEFORE USING HOSE LABELED AND CERTIFIED AS NON-
		CONDUCTIVE ON OR NEAR ELECTRIC LINES BE SURE THE
		HOSE IS MAINTAINED AS NON-CONDUCTIVE. THE HOSE
		SHOULD BE REGULARLY TESTED FOR ELECTRIC CUR-
		RENT LEAKAGE IN ACCORDANCE WITH YOUR SAFETY
		DEPARTMENT INSTRUCTIONS.
	2. A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJEC-
		TION INTO THE BODY OR CAUSE OTHER SEVERE
		PERSONAL INJURY.
		A. DO NOT EXCEED SPECIFIED FLOW AND PRESSURE
		FOR THIS TOOL. EXCESS FLOW OR PRESSURE MAY
		CAUSE A LEAK OR BURST.
		B. DO NOT EXCEED RATED WORKING PRESSURE OF
		HYDRAULIC HOSE USED WITH THIS TOOL. EXCESS
		PRESSURE MAY CAUSE A LEAK OR BURST.
		C. CHECK TOOL HOSE COUPLERS AND CONNECTORS
		DAILY FOR LEAKS. DO NOT FEEL FOR LEAKS WITH
		YOUR HANDS. CONTACT WITH A LEAK MAY RESULT
		IN SEVERE PERSONAL INJURY.
		I M P O R T A N T

07892

BR87 Name Tag Decal		READ OPERATION MANUAL AND
(Model BR87120D &		SAFETY INSTRUCTIONS FOR THIS
BR87320 Only)		TOOL BEFORE USING IT.
		USE ONLY PARTS AND REPAIR

		PROCEDURES APPROVED BY
The safety tag (P/N 15875) at right is attached to		STANLEY AND DESCRIBED IN THE
		OPERATION MANUAL.
the tool when shipped from the factory. Read and		TAG TO BE REMOVED ONLY BY
understand the safety instructions listed on this		TOOL OPERATOR.
tag before removal. We suggest you retain this		SEE OTHER SIDE
tag and attach it to the tool when not in use.

3810 S.E. Naef Road	73028
Milwaukie, Oregon 97267 U.S.A.

BR87 BREAKER

WEIGHT: 83lb ⁄ 38kg

FLOW: 7–9gpm ⁄ 26–34lpm

MAX PRESS: 2500psi/172bar

NOM PRESS: 1500psi/103bar

ACCUMULATOR	CHARGE:
800psi ⁄ 55bar	NITROGEN

73028

BR87 Name Tag Decal

D A N G E R

D.DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO NOT ABUSE HOSE. DO NOT USE KINKED, TORN OR DAMAGED HOSE.

3.MAKE SURE HYDRAULIC HOSES ARE PROPERLY CON- NECTED TO THE TOOL BEFORE PRESSURING SYSTEM. SYSTEM PRESSURE HOSE MUST ALWAYS BE CON- NECTED TO TOOL “IN” PORT. SYSTEM RETURN HOSE MUST ALWAYS BE CONNECTED TO TOOL “OUT” PORT. REVERSING CONNECTIONS MAY CAUSE REVERSE TOOL OPERATION WHICH CAN RESULT IN SEVERE PERSONAL INJURY.

4.DO NOT CONNECT OPEN-CENTER TOOLS TO CLOSED- CENTER HYDRAULIC SYSTEMS. THIS MAY RESULT IN LOSS OF OTHER HYDRAULIC FUNCTIONS POWERED BY THE SAME SYSTEM AND/OR SEVERE PERSONAL INJURY.

5.BYSTANDERS MAY BE INJURED IN YOUR WORK AREA. KEEP BYSTANDERS CLEAR OF YOUR WORK AREA.

6.WEAR HEARING, EYE, FOOT, HAND AND HEAD PRO- TECTION.

7.TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE, ALL TOOL REPAIR MAINTENANCE AND SERVICE MUST ONLY BE PERFORMED BY AUTHORIZED AND PROPERLY TRAINED PERSONNEL.

IM P O R T A N T

READ OPERATION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT.

USE ONLY PARTS AND REPAIR PROCEDURES APPROVED BY STANLEY AND DESCRIBED IN THE OPERATION MANUAL.

TAG TO BE REMOVED ONLY BY

TOOL OPERATOR.

SEE OTHER SIDE

SAFETY TAG P/N 15875 (Shown smaller then actual size)

BR87 User Manual ◄ 7

Stanley Black & Decker BR87 user manual Tool Stickers & Tags, N G E R