Simer Pumps 5020B-04 owner manual Warranty, Retain Original Receipt for Your Records

Page 2

Warranty

2

RETAIN ORIGINAL RECEIPT FOR YOUR RECORDS.

LIMITED WARRANTY

SIMER warrants to the original consumer purchaser (“Purchaser” or “You”) of its products that they are free from defects in material and workmanship for a period of twelve (12) months from the date of the original consumer purchase.

If, within twelve (12) months from the original consumer purchase, any such product shall prove to be defective, it shall be repaired or replaced at SIMER’s option, subject to the terms and conditions set forth below. The original purchase receipt and product warranty information label are required to determine warranty eligibility. Eligibility is based on purchase date of original product – not the date of replacement under warranty. The warranty is limited to repair or replacement of product only – Purchaser pays all removal, installation, labor, shipping, and incidental charges.

For parts or troubleshooting assistance, DO NOT return product to your retail store. Contact SIMER Customer Service at 1-800-468-7867 / 1-800-546-7867.

Claims made under this warranty shall be made by returning the product (except sewage pumps, see below) to the retail outlet where it was purchased immediately after the discovery of any alleged defect. SIMER will subsequently take corrective action as promptly as reasonably possible. No requests for service will be accepted if received more than 30 days after the warranty expires.

SEWAGE PUMPS

DO NOT return a sewage pump (that has been installed) to your retail store. Contact SIMER Customer Service. Sewage pumps that have seen service and been removed carry a contamination hazard with them.

If your sewage pump has failed:

Wear rubber gloves when handling the pump;

For warranty purposes, return the pump’s cord tag and original receipt of purchase to the retail store;

Dispose of the pump according to local disposal ordinances.

Exceptions to the Twelve (12) Month Limited Warranty

 

 

Product

Warranty Period

 

BW85P, CM10, CMK, M40, M40P

90 days

 

 

 

 

 

 

2300, 2310, 2330, 2520ULST, 2943, 2955, 2956, 2957, 2960, 5023SS, A5500

2 Years

 

 

 

 

 

 

4” Submersible Well Pumps, 2945, 2958, 2975PC, 2985, 3075SS, 3983, 3984

3 Years

 

 

 

 

 

 

Pre-Charge Water System Tank, 3985, 3986

5 Years

 

 

 

3963, 3988, 3995, 3997

Lifetime

 

 

 

 

General Terms and Conditions

You must pay all labor and shipping charges necessary to replace product covered by this warranty. This warranty does not apply to the following: (1) acts of God; (2) products which, in SIMER’s sole judgement, have been subject to negligence, abuse, accident, misapplication, tampering, or alteration; (3) failures due to improper installation, operation, maintenance or storage; (4) atypical or unapproved application, use or service; (5) failures caused by corrosion, rust or other foreign materials in the system, or operation at pressures in excess of recommended maximums.

This warranty sets forth SIMER’s sole obligation and purchaser’s exclusive remedy for defective products.

SIMER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES WHATSOEVER.

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU- LAR PURPOSE. THE FOREGOING WARRANTIES SHALL NOT EXTEND BEYOND THE DURATION PROVIDED HEREIN.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal rights and You may also have other rights which vary from state to state.

SIMER • 293 Wright St., Delavan, WI U.S.A. 53115

Phone: 1-800-468-7867 / 1-800-546-7867 • Fax: 1-800-390-5351

Web Site: http://www.simerpumps.com

Image 2
Contents Llame al MOD B-04Call PagesWarranty Retain Original Receipt for Your RecordsGeneral Safety SafetySpecifications DescriptionInstallation / Operation InstallationOperation TroubleshootingOperation Key Part Description Repair PartsSwitch FP0018-7D 5020B-04Garantie Pompes D’EAUX D’ÉGOUTRendement SécuritéCaractéristiques Techniques Installation / Fonctionnement La pompe doit être à niveau la colonne doit être verticaleFonctionnement Diagnostic des pannesFonctionnement Débrancher la pompe avant de travailler sur la pompeInterrupteur FP0018-7D Pièces de rechangeRéf Désignation des pièces Qté 5020B-04 Garantía Bombas CloacalesEspecificaciones SeguridadDescripción RendimientoInstalación / Funcionamiento InstalaciónFuncionamiento Solución de problemasFuncionamiento Interruptor FP0018-7D RefaccionesDescripción Cant 5020B-04

5020B-04 specifications

Simer Pumps has long been known for its reliable and efficient pumping solutions, and the Simer Pumps 5020B-04 model stands out as a prime example of the brand's commitment to quality and performance. Designed primarily for residential and light commercial applications, this pump offers a host of features and advanced technologies to meet a variety of pumping needs.

One of the defining characteristics of the 5020B-04 is its robust construction. Built with durable materials, the pump is designed to withstand both the rigors of daily use and the environmental challenges it may face. The housing is resistant to corrosion, ensuring longevity even in harsh conditions. This reliability makes it a valuable addition to any homeowners' toolkit or commercial setup.

The Simer Pumps 5020B-04 is powered by a high-performance motor that provides substantial horsepower while maintaining energy efficiency. With a power rating of 1/2 HP, the pump is capable of handling moderate to heavy workloads with ease. It operates smoothly, minimizing noise and vibrations, which is especially important for residential users looking to maintain a peaceful environment.

In terms of technology, the 5020B-04 utilizes a robust thermal overload protection system. This feature prevents the motor from overheating, significantly extending the life of the pump and minimizing maintenance costs. Additionally, the pump is equipped with an innovative float switch design that ensures automatic operation; it turns on and off based on the water level, making it hassle-free for users.

Another key characteristic of the Simer Pumps 5020B-04 is its versatility. It is suitable for a range of applications, including sump pumping, draining flooded areas, and managing water in basements. The pump can handle solid particles up to a specified size, allowing it to manage dirty water effectively without compromising performance.

The compact design of the 5020B-04 makes it easy to install and maneuver, even in tight spaces. This user-friendly aspect, combined with its reliable functionality, makes it an excellent choice for homeowners and contractors alike.

In conclusion, the Simer Pumps 5020B-04 stands as a testament to the brand's dedication to quality engineering. With its durable construction, efficient motor, advanced thermal protection, and versatile application, this pump is designed to deliver exceptional performance and reliability, catering to a wide range of pumping needs. Whether for residential or light commercial use, the 5020B-04 is an investment in efficiency and dependability.