Miller Electric Intellifire 250 manual Remote 14 Receptacle RC14 Information and Connections

3-3. Remote 14 Receptacle RC14 Information and Connections

1

				4
	A K		J I	5
	B
	C	L N	H
	D	M	G
		E	F
2	3

1Front Panel

2Plug

3Threaded Collar

4Keyway

5Remote 14 Receptacle RC14 (See Section 3-4)

To connect to receptacle, align key- way, insert plug, and tighten threaded collar.

		sb7.1* 3/93 - Ref. S-0004-A / Ref. S-0750 / Ref. ST-801 826-C
3-4. Remote 14 Socket Information
	Socket	Socket Information
Remote Contactor	A	+24 volts dc.
	B	Contact closure to A completes 24 volts dc contactor control circuit.
	C	Command reference; +10 volts dc.
Remote Output Control	D	Control circuit common.
	E	Input command signal (potentiometer wiper or 0 to +10 volts dc).
	G	Not used.
Power Source Limit	F, J	Absence of internal contact closure between F and J signals power source failure to remote
		control device.
	H	Coil loss compensation value.
	I	Actual frequency output signal (1 volt/10 kHz).
Remote Metering	L	Average power output signal (1 volt/5 kW).
	M	Voltage output signal RMS (1 volt/100 volts).
	N	Current output signal RMS (1 volt/100 amperes).
	K	Chassis common.

OM-184 227 Page 8