Chicago Electric 40457 operating instructions For technical questions, please call

Page 5

13.Do not operate the power tool near flammable materials. Sparks could ignite these materials.

14.Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.

15.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

16.Avoid unintentional starting. Prepare to begin work before turning on the tool.

17.Do not depress the spindle lock when starting or during operation.

18.Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.

19.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control and personal injury.

20.This product is not a toy. Keep it out of reach of children.

21.People with pacemakers should consult their physician(s) before use.

Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:

Avoid operating alone.

Do not use with power switch locked on.

Properly maintain and inspect to avoid electrical shock.

Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be implemented – it prevents sustained electrical shock.

22.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

Lead from lead-based paints

Crystalline silica from bricks and cement or other masonry products

Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

(California Health & Safety Code § 25249.5, et seq.)

23.WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.)

24.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

SKU 40457

For technical questions, please call 1-800-444-3353.

Page 5

Image 5
Contents Rotary Tool KIT 4 Speed For technical questions or replacement parts, please callGeneral Power Tool Safety Warnings Important Safety InformationSave This Manual For technical questions, please callKeep cutting tools sharp and clean Personal safetyService For technical questions, please call Outlets for 2-Prong Plug Vibration SafetyGrounding Extension CordsSee Table a SymbologyInstructions for putting into use Read the entire Important SpecificationsUnpacking Operating Instructions Work Piece and Work Area Set UpSet-Up Maintenance And Servicing Setting the SpeedCleaning, Maintenance, and Lubrication Accessory Storage and HandlingProblem Possible Causes Likely Solutions TroubleshootingPart Description Qty Please Read the Following CarefullyQty Part Description Part DescriptionRecord Product’s Serial Number Here Limited 90 DAY Warranty