DM 2610938876
|
|
| ACCESSORIES | |
For availability of all accessories and attachments, refer your local hardware, hobby or home | ||||
center. Or contact Dremel Consumer Service at: | ||||
|
| Use only Dremel™, | ||
! | WARNING | |||
not designed for this tool and may lead to personal injury or property | ||||
damage. | ||||
|
| |||
|
| Drywall Cutting Bit | Tile Cutting Bit | |
When using a template (outlet box) behind the drywall, cut in a counterclockwise direc- tion.
High Speed Router Bits
For routing, inlaying and mortising in wood and other soft materials. Use only with Dremel™ Router Attachment #330 or Shape/Router Table #231.
Mandrels
A mandrel is a shank with a threaded or screw head used with polishing accessories, cutting wheels, sanding discs and polishing points. The mandrel is a permanent shank, allowing for replacement of the worn head when necessary.
Screw Mandrel
For use with the felt polishing 1/8" shank tip and felt polishing wheels.
For use wall tile, cement board and plaster. Start the bit into the material at a 45° angle and then slowly bring it to a 90° angle to begin the cut.
Multipurpose Cutting Bit
For use in wood, plastics, drywall, fiberglass, vinyl or aluminum siding, acoustical tile and laminates.
Start the bit into the material at a 45° angle and then slowly bring it to a 90° angle to begin the cut.
Small Screw Mandrel
Mandrel has a small screw 1/8" shank at the tip and is used with
emery and fiberglass cutting wheels, sanding discs and polishing wheels.
Threaded Tip Mandrel
Mandrel has a threaded tip 1/8" shank which threads into the polish-
ing point accessory #427.
Aluminum Oxide Grinding |
| ||
Stones (red/brown) | stones |
| |
These | grinding | 1/8" shank | |
come round, pointed or flat | |||
and are | made of | aluminum |
|
oxide. Use them for every possible grinding operation: sharpening lawn mower blades, screwdriver tips, knives, scissors, chisels and other cutting tools. Use to remove flash from metal castings, deburring any kind of metal. These grinding stones can be resharpened with a dressing stone. In machine shops, high speed drills and cutters are normally ground with aluminum oxide wheels.
Silicon Carbide Grinding
Stones (blue/green) 1/8" shank Tougher than aluminum oxide
points, these are made especially for use on hard materials such as glass and ceramics.
Diamond Wheel Points
Used for fine detail work on 3/32" shank wood, jade, ceramic, glass and
other hard material. Bits are covered with diamond parti- cles.
17