Dremel 03-5415317 manual General Safety Rules, Work area safety, Electrical safety

Circuit Interrupter (GFCI) must be used to supply the power to your tool. GFCI and personal protection devices like electri- cian’s rubber gloves and footwear will fur- ther enhance your personal safety.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate con- ditions will reduce personal injuries.

Avoid accidental starting. Ensure the switch is in the off-position before plug- ging in. Carrying power tools with your fin- ger on the switch or plugging in power tools that have the switch on invites accidents.

Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in person- al injury.

Do not overreach. Keep proper footing and balance at all times. This enables bet- ter control of the power tool in unexpected situations.

Dress properly. Do not wear loose cloth- ing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

If devices are provided for the connec- tion of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.

DM 2610938876 03-06.qxd 3/17/06 9:21 AM Page 2

GENERAL SAFETY RULES

! WARNING Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

Work area safety

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of elec- tric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radia- tors, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for out- door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

Do not use AC only rated tools with a DC power supply. While the tool may appear to work, the electrical components of the AC rated tool are likely to fail and create a haz- ard to the operator.

If operating the power tool in damp loca- tions is unavoidable a Ground Fault

2