DM 2610938876
Keep handles dry, clean and free from oil | Keep cutting tools sharp and clean. |
and grease. Slippery hands cannot safely | Properly maintained cutting tools with sharp |
control the power tool. | cutting edges are less likely to bind and are |
Power tool use and care | easier to control. |
Use the power tool, accessories and tool | |
Do not force the power tool. Use the cor- | bits etc., in accordance with these |
rect power tool for your application. The | instructions and in the manner intended |
correct power tool will do the job better and | for the particular type of power tool, tak- |
safer at the rate for which it was designed. | ing into account the working conditions |
Do not use the power tool if the switch | and the work to be performed. Use of the |
does not turn it on and off. Any power tool | power tool for operations different from |
that cannot be controlled with the switch is | those intended could result in a hazardous |
dangerous and must be repaired. | situation. |
Disconnect the plug from the power | Use clamps or other practical way to |
source and/or the battery pack from the | secure and support the workpiece to a |
power tool before making any adjust- | stable platform. Holding the work by hand |
ments, changing accessories, or storing | or against your body is unstable and may |
power tools. Such preventive safety meas- | lead to loss of control. |
ures reduce the risk of starting the power | Service |
tool accidentally. | |
Store idle power tools out of the reach of | Have your power tool serviced by a quali- |
children and do not allow persons unfa- | fied repair person using only identical |
miliar with the power tool or these | replacement parts. This will ensure that the |
instructions to operate the power tool. | safety of the power tool is maintained. |
Power tools are dangerous in the hands of | Develop a periodic maintenance sched- |
untrained users. | ule for your tool. When cleaning a tool be |
Maintain power tools. Check for mis- | careful not to disassemble any portion of |
alignment or binding of moving parts, | the tool since internal wires may be mis- |
breakage of parts and any other condi- | placed or pinched or safety guard return |
tion that may affect the power tools oper- | springs may be improperly mounted. |
ation. If damaged, have the power tool | Certain cleaning agents such as gasoline, |
repaired before use. Many accidents are | carbon tetrachloride, ammonia, etc. may |
caused by poorly maintained power tools. | damage plastic parts. |
SAVE THESE INSTRUCTIONS
SAFETY RULES FOR ROTARY TOOL
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
Accessories must be rated for at least the speed recommended on the tool warning label. Wheels and other accessories run-
ning over rated speed can fly apart and cause injury.
If cutting into existing walls or other blind areas where electrical wiring may exist is unavoidable, disconnect all fuses or circuit breakers feeding this worksite.
Do not operate the flexible shaft with a sharp bend. Over bending the shaft can generate excessive heat on the jacket or hand piece. The recommended minimum is 6" radius.
Always disconnect the power cord from the power source before making any adjustments or attaching any acces-
3