Craftsman 572.6112 owner manual Symbols, Name Designation/Explanation

SYMBOLS

IMPORTANT! Some of the following symbols may be used on your tool. Please study
them and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and safer.
Symbol					Name		Designation/Explanation
			V		Volts		Voltage (potential)
			A		Amperes		Current
		Hz			Hertz		Frequency (cycles per second)
			W		Watt		Power
		kg			Kilograms		Weight
	min				Minutes		Time
			s		Seconds		Time
					Diameter		Size of drill bits, grinding wheels,etc.
		n0			No load speed		Rotational speed, at no load
.../min					Revolutions or reciprocation		Revolutions, strokes, surface speed,
per minute					orbits etc. per minute
0					Off position		Zero speed, zero torque...
1, 2, 3, ...					Selector settings		Speed, torque or position settings.
I, II, III,							Higher number means greater speed
0					Infinitely variable selector with off		Speed is increasing from 0 setting
					Arrow		Action in the direction of arrow
					Alternating current		Type or a characteristic of current
					Direct current		Type or a characteristic of current
					Alternating or direct current		Type or a characteristic of current
					Class II construction		Designates Double Insulated
							Construction tools.
					Earthing terminal		Grounding terminal
					Warning symbol		Alerts user to warning messages
					Ni-Cad RBRC seal		Designates Ni-Cad battery recycling
							program
				This symbol designates			This symbol designates
				that this tool is listed by			that this tool is listed to
				Underwriters Laboratories.			Canadian Standards by
				This symbol designates			Underwriters	This symbol
							Laboratories.	designates
				that this tool is listed by			This symbol designates that	that
				the Canadian Standards				this tool
				Association, and is listed			this tool is listed by	complies
				to US Standards by CSA.			Underwriters Laboratories,	to NOM
				This symbol designates			and listed to Canadian	Mexican
				that this tool is listed by			Standards by Underwriters	Standards.
				the Canadian Standards			Laboratories.
				Association.		6