|
|
| ASSEMBLY |
| |||
! | WARNING | Always unplug rotary | 2. With the shaft lock button engaged, | ||||
tool before changing |
| loosen and remove the collet nut. Use | |||||
accessories, changing collets, or |
| the collet wrench if necessary. | |||||
servicing the tool. | 3. Remove the collet by pulling it free from | ||||||
Collets |
|
|
| the shaft. |
| ||
The Craftsman accessories available for the | 4. Install the appropriate size collet fully | ||||||
rotary tool come with various shank sizes. |
| into the shaft and reinstall the collet nut | |||||
Four size collets are available to |
| finger tight. Do not fully tighten the nut | |||||
accommodate the different shank sizes. |
| when there is no bit or accessory | |||||
Collet sizes are identified by the rings on the |
| installed. |
| ||||
back of the collet: | Changing Accessories | ||||||
• 1/32" collet has 1 ring (No. 483) | 1. Press the shaft lock button and rotate | ||||||
• 1/16" collet has 2 rings (No. 482) | |||||||
| the shaft by hand until it engages the | ||||||
• 3/32" collet has 3 rings (No. 481) |
| shaft lock. | Do not engage the shaft | ||||
• 1/8" collet has no rings (No. 480) | ! | WARNING | |||||
lock button while rotary | |||||||
NOTE: Some rotary tool kits may not include | tool is running. |
| |||||
all four collet sizes. Collets are available | 2. With the shaft lock button engaged, | ||||||
separately. |
|
| |||||
|
|
| loosen (do not remove) the collet nut. | ||||
|
|
|
|
| Use the collet wrench if necessary. | ||
|
|
|
| 3. Insert the bit or accessory shank fully | |||
|
|
|
|
| into the collet. | ||
| 1/8" Collet (480) | 4. With the shaft lock button engaged, | |||||
Collet Nut | 3/32" Collet (481) |
| finger tighten the collet nut until the bit or | ||||
| 1/16" Collet (482) |
| accessory shank is gripped by the collet. | ||||
|
|
| 1/32" Collet (483) | NOTE: Be sure to read the instructions | |||
|
|
|
| supplied with your Craftsman accessory for | |||
! | CAUTION | Always use the collet | further information on its use. | ||||
which matches the shank |
|
|
| ||||
size of the accessory you plan to use. Do | Shaft Lock Button |
| |||||
not force a larger diameter shank into a |
| ||||||
smaller collet. |
|
|
|
|
| ||
Changing Collets |
|
|
| ||||
1. Press the shaft lock button, hold down |
|
|
| ||||
| and rotate the shaft by hand until it |
|
|
| |||
| engages the shaft. |
|
|
| |||
! | WARNING |
| Do not engage the shaft |
|
|
| |
| lock button while rotary |
|
|
| |||
tool is running. |
|
|
|
| |||
Shaft Lock Button
To
Tighten
Collet Wrench
To
Loosen
Collet Nut
8